Zie specificaties voor productdetails.
DMG4N60SJ3
Product Overview
Category
The DMG4N60SJ3 belongs to the category of power MOSFETs.
Use
It is commonly used in power supply applications, motor control, and other high-power switching circuits.
Characteristics
- High voltage capability
- Low on-resistance
- Fast switching speed
- Low gate charge
Package
The DMG4N60SJ3 is typically available in a TO-252 package.
Essence
This MOSFET is essential for efficient power management and control in various electronic devices and systems.
Packaging/Quantity
It is usually packaged in reels with a quantity of 2500 units per reel.
Specifications
- Drain-Source Voltage (VDS): 600V
- Continuous Drain Current (ID): 4A
- On-Resistance (RDS(on)): 2.5Ω
- Gate-Source Voltage (VGS): ±30V
- Total Gate Charge (Qg): 10nC
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The DMG4N60SJ3 has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- Low conduction losses
- High efficiency
- Enhanced thermal performance
- Reliable switching behavior
Advantages and Disadvantages
Advantages
- High voltage capability
- Low on-resistance leading to reduced power dissipation
- Fast switching speed for improved efficiency
- Suitable for high-power applications
Disadvantages
- Higher cost compared to standard MOSFETs
- Requires careful handling due to its sensitivity to electrostatic discharge
Working Principles
The DMG4N60SJ3 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
The DMG4N60SJ3 is widely used in: - Switch-mode power supplies - Motor drives - Inverters - Power factor correction circuits - Electronic ballasts
Detailed and Complete Alternative Models
Some alternative models to the DMG4N60SJ3 include: - IRF840 - STP16NF06L - FQP50N06L - IPP60R190C6
In conclusion, the DMG4N60SJ3 power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for various high-power applications such as power supplies, motor control, and inverters.
[Word count: 366]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DMG4N60SJ3 in technische oplossingen
What is DMG4N60SJ3?
- DMG4N60SJ3 is a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) designed for use in power supply and motor control applications.
What is the maximum voltage rating of DMG4N60SJ3?
- The maximum voltage rating of DMG4N60SJ3 is 600V.
What is the maximum current rating of DMG4N60SJ3?
- The maximum continuous drain current rating of DMG4N60SJ3 is 4A.
What are the typical applications of DMG4N60SJ3?
- DMG4N60SJ3 is commonly used in switch mode power supplies, motor control circuits, and other high voltage applications.
What is the on-state resistance of DMG4N60SJ3?
- The on-state resistance of DMG4N60SJ3 is typically around 3 ohms.
Is DMG4N60SJ3 suitable for high-frequency switching applications?
- Yes, DMG4N60SJ3 is designed to operate efficiently in high-frequency switching applications.
Does DMG4N60SJ3 require a heat sink for operation?
- Depending on the application and operating conditions, a heat sink may be required to ensure proper thermal management.
What are the key features of DMG4N60SJ3?
- Some key features of DMG4N60SJ3 include low on-state resistance, fast switching speed, and high voltage capability.
Can DMG4N60SJ3 be used in automotive applications?
- DMG4N60SJ3 is not specifically designed for automotive applications and may not meet the necessary automotive standards.
Where can I find the detailed datasheet for DMG4N60SJ3?
- The detailed datasheet for DMG4N60SJ3 can be found on the manufacturer's website or through authorized distributors.