Power chip

This tiny integrated device provides a one-component solution for switching inductive loads such as relays, magnetically switched incandescent lamps, and small DC motors without the need for freewheeling diodes. It accepts logic-level inputs, so it can be driven by a variety of devices, including logic gates, inverters, and microcontrollers.

DIP, 50.8*25.4*15mm, input range DC18~72V/4, 1, output 5V, 40W, isolation voltage greater than 1.5kV, 2*1 inch international standard, industrial grade, T_LD-40WR3 series module power supply efficiency up to 92%, Compatible with TURB4805LD-40WR3

Input voltage (nominal value) 5 Output voltage (VDC) 5 Minimum current (mA) 0 Maximum current (mA) 400 Full load efficiency (%) 85 Maximum capacitive load (uF) 2400

3.3V fixed output, Iout=200mA, Vin=6V(Max)

LMR64010 SIMPLE SWITCHER® 2.7V to 14V, 1A Boost Regulator with SOT-23 encapsulation

3.3V fixed output, Iout=150mA, Vin=24V(Max)

The NCP1396 A/B provides everything needed to build a reliable and robust resonant mode power supply. Its unique architecture includes a 500 kHz voltage controlled oscillator with a control mode that allows flexibility when an OR function is required, such as in multiple feedback path implementations. Thanks to its proprietary high-voltage technology, the controller is suitable for use in half-bridge applications with a bootstrap MOSFET driver, accepting large voltages up to 600 V. Multiple reaction-time protection features such as immediate shutdown or timer-based events, under-voltage, disconnected optocoupler detection, etc., contribute to safer converter designs without increasing circuit complexity. The adjustable dead time is also beneficial to reduce the breakdown current and increase the switching frequency.

TLV700 200-mA, Low-IQ, Low-Dropout Voltage Regulator for Portable Equipment

-