Power chip

The FAN3226-29 series of dual 2-A gate drivers provides high peak current pulses with short switching intervals for driving N-channel enhancement mode MOSFETs in low-side switching applications. The driver offers TTL or CMOS input thresholds. Internal circuitry holds the output low until the supply voltage is within operating range, providing undervoltage lockout. In addition, these drivers feature matched internal propagation delays between the A and B channels, making them suitable for applications requiring tightly clocked dual gate drivers, such as synchronous rectifiers. This enables the parallel connection of the two drivers, effectively doubling the current capability to drive one MOSFET. The FAN322X driver integrates the MillerDrive structure for the final output stage. This bipolar MOSFET combination provides high current during the Miller plateau phase of the MOSFET turn-on/turn-off process to minimize switching losses while providing rail-to-rail voltage swing and reverse current capability. The FAN3226 provides two back drivers and the FAN3227 provides two non-back drivers. Each device has dual independent enable pins that default to an on state if left unconnected. In the FAN3228 and FAN3229, each channel has two inputs of opposite polarity and can be configured as non-inverting or inverting with selectable enable using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs so that the output pulls low to keep the power MOSFETs off.

3A SIMPLE SWITCHER™ Power Module with 20V Max Input Voltage 7-TO-PMOD -40 to 85

Power Switch-Driver-1:1-N-Channel-2A-6-WLCSP (1.45x0.95)