Power chip

The NCP1342 is a highly integrated quasi-resonant flyback controller for designing high performance off-line power converters. The NCP1342 has an integrated active X2 capacitor discharge function, which can achieve a no-load power consumption of less than 30 mW. The NCP1342 has a proprietary valley lockout circuit that ensures stable valley switching. The system operates down to the 6th valley and transitions to frequency foldback mode to reduce switching losses. As the load decreases further, the NCP1342 enters a silence skip mode to manage power delivery while minimizing noise. To ensure light load performance for high frequency designs, the NCP1342 incorporates minimum peak current modulation (MPCM) to quickly reduce switching frequency. To help ensure converter robustness, the NCP1342 implements several key protection features such as internal under-voltage detection, non-dissipative over-power protection (OPP) that guarantees a constant maximum output power at any input voltage, a lockout via a dedicated pin Stored overvoltage and NTC-ready high-temperature protection, along with line removal detection, safely discharges the X2 capacitor when the AC line is removed.

The NCP1071 integrates a fixed frequency current mode controller and 700 V MOSFETs. Using PDIP-7 or SOT-223 encapsulation, the NCP1071 offers a high level of integration including soft-start, frequency dithering, short-circuit protection, cycle skipping, maximum peak current set point, slope compensation, and dynamic self-power supply (no auxiliary winding required) . Unlike other monolithic solutions, the NCP1071 is noiseless: during normal load operation, it switches at one of the available frequencies (65, 100, 130 kHz). When the demand for output power disappears, the IC will automatically enter frequency foldback mode, providing excellent energy efficiency at light loads. When power demand decreases further, it enters skip mode, reducing standby power consumption to no-load conditions. Protection features include: timers to detect overload or short circuit events, overvoltage protection with automatic recovery, and AC input line voltage detection. To improve standby performance, connecting an auxiliary winding stops DSS operation, helping to reduce input power consumption on the high line to less than 50 mW.

BiCMOS Power Factor Pre-Regulator 16-SOIC 0 to 70

BiCMOS Power Factor Pre-Regulator 16-SOIC -40 to 85