Power chip

Automotive Fast Transient Response 1A Low Dropout Regulator 20-HTSSOP -40 to 125

Voltage Reference Type: Parallel Output Type: Adjustable Input Voltage: 35V Output Voltage: 1.24V~30V Accuracy: 0.5% Temperature Coefficient: 39ppm/℃ Minimum Cathode Current Regulation: 80uA Dynamic Impedance: 250mΩ @(Topr) Low Voltage (1.24V ) Adjustable Precision Shunt Regulator

200mA Low Transient Current, Ultra Low Noise, High PSRR Low Dropout Linear Regulator 6-WSON -40 to 125

200mA, Low IQ, Low Noise, Low Dropout Voltage Regulator for Portable Devices 4-X2SON -40 to 125

200mA, Low IQ, Low Noise, Low Dropout Voltage Regulator for Portable Devices 4-X2SON -40 to 125

4.5V to 40V, 2A, up to 15W Inverting Integrated Power Solution 41-B1QFN -40 to 85

The FAN3278 is a dual 1.5A gate driver optimized for driving a high-side P-channel MOSFET and a low-side N-channel MOSFET in motor control applications with voltage rails up to 27V. Internal circuitry limits the voltage applied to the gate of the external MOSFET to a maximum of 13V. The driver has a TTL input limit and provides buffering and level shifting of the logic input. Internal circuitry prevents the output from switching the device at V

The NCV7518/NCV7518A Programmable Six-Channel Low-Side MOSFET Pre-Driver is part of the FLEXMOS automotive grade product family for driving logic level MOSFETs. The product can be controlled through a combination of serial SPI and parallel inputs. The device offers 3.3-V/5-V compatible inputs, and the serial output driver can be powered from either 3.3-V or 5-V. An internal power-on reset provides controlled power-up. A reset input allows external reinitialization, while an enable input allows simultaneous disabling of all outputs and diagnostics. Each channel independently monitors the drain voltage of its external MOSFET for fault conditions. The shorted load fault detection threshold is fully programmable using a combination of an externally programmed reference voltage and a discrete internal ratio. These ratios are SPI selectable, allowing different detection thresholds to be set for each channel. The fault-recovery operation of each channel is programmable and can be selected for latching shutdown or automatic retry. The status information for each channel is 3 bits coded for the fault type, provided via SPI communication. The FLEXMOS family offers application scalability through selection of external MOSFETs.