Power chip

6A 12V Input Non-Isolated DDR/QDR Memory Bus Termination Module 6-Surface Mount Module -40 to 85

The NCP81071 is a high-speed dual low-side MOSFET driver. It is capable of delivering large peak currents to capacitive loads, up to 5A peak current in the Miller plateau, helping to reduce the Miller effect during MOSFET switching transitions. The device provides enabling features that provide users with greater control than existing solutions in a variety of applications. This part features MSOP8?EP encapsulation, SOIC8 encapsulation, DFN8 2 mm x 2 mm encapsulation and WDFN8 3 mm x 3 mm encapsulation.

The FAN3226-29 series of dual 2-A gate drivers provides high peak current pulses with short switching intervals for driving N-channel enhancement mode MOSFETs in low-side switching applications. The driver offers TTL or CMOS input thresholds. Internal circuitry holds the output low until the supply voltage is within operating range, providing undervoltage lockout. In addition, these drivers feature matched internal propagation delays between the A and B channels, making them suitable for applications requiring tightly clocked dual gate drivers, such as synchronous rectifiers. This allows two drivers to be connected in parallel, effectively doubling the current capability driving a single MOSFET. The FAN322X driver integrates the MillerDrive structure for the final output stage. This bipolar-MOSFET combination provides high current during the Miller plateau phase of MOSFET turn-on/turn-off to minimize switching losses while providing rail-to-rail voltage swing and reverse current capability. The FAN3226 provides two inverting drivers and the FAN3227 provides two non-inverting drivers. Each device has dual independent enable pins that default to an on state if left unconnected. In the FAN3228 and FAN3229, each channel has two inputs of opposite polarity and can be configured as non-inverting or inverting with selectable enable using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs so that the output pulls low to keep the power MOSFETs off.

UCC29002 Advanced 8-Pin Load-Share Controller

2A, 100V Half Bridge Gate Driver with 8V UVLO and CMOS Input 10-WSON -40 to 125

Synchronous rectification