Power chip

Automotive 250mA Ultra Low Noise Low Dropout Regulator 4-X2SON -40 to 125

6-Amp Output 3.3V Input Bus Termination Power Module for DDR/QDR Memory 6-Through-Hole Module -40 to 85

The monolithic half-bridge gate driver IC FAN7380_OP can drive MOSFETs and IGBTs up to +600V. ON Semiconductor's high-voltage process and common-mode interference suppression technology provide stable operation of the high-side driver under high dv/dt interference conditions. Advanced level shifting circuitry allows high-side gate driver operation up to VS = -9.8V (typ) for VBS = 15V. The input logic levels are compatible with standard TTL family logic gates. Internal shoot-through protection circuitry provides a 100ns dead-time to prevent simultaneous turn-on of the output switching devices during transients. UVLO circuits for both channels prevent faulty operation when VCC and VBS are below specified threshold voltages. Typical source/sink currents of the output driver are 90mA/180mA, respectively, suitable for fluorescent lamp/compact fluorescent lamp ballast applications, and systems requiring low di/dt interference.

The NCD5703 series is a group of high current, high performance stand-alone IGBT drivers for medium to high power applications including induction heating, welding, solar inverters, motor control, and uninterruptible power supplies. The device eliminates many external components, providing a cost-effective solution. Device protection features are active Miller clamp (for NCD5703A), accurate UVLO, DESAT protection and active low fault output. The drivers also feature accurate 5.0 V outputs (all versions) and separate high and low (VOH and VOL) ​​driver outputs (NCD5703C only) for easy system design. These drivers can operate with a wide range of unipolar bias supply voltages (or bipolar bias supplies for the NCD5703B). All versions feature 8-pin SOIC encapsulation.

2A/2A Single Channel Gate Driver with 40V VDD and Inverting Input 5-SOT-23 -40 to 125