Power chip

Input/output isolation withstand voltage: 1500VDC 0.5mA 1Minute\nOutput ripple (20MHz bandwidth): 80mVp-p Max\nOutput noise (20MHz bandwidth): 100mVp-p Max\nInput voltage: +24VDC (18VDC~72VDC) \nOutput voltage: +5VDC±2%, output current: +1A Max\nEfficiency: 76% Min\nWorking case temperature: -25°C~+85°C\nStorage temperature: -25°C~+ 125°C\nEnvironmental characteristics: Maximum working shell temperature: 85°C Relative temperature: 10%~90%\nIt has good shielding interference performance, electromagnetic compatibility, short circuit protection, self-recovery and other functions.

Isolated power module: input range DC18~72V/4:1, output 3.3V, 6W, isolation voltage greater than 1.5kV, 1*1 inch international standard, industrial grade, TD6 series module power efficiency up to 83%, DIP: 25.4*25.4 *10mm

TPS3710 Wide VIN Voltage Detector

Isolated power module: input range DC9~36V/4:1, output ±5V, 6W, isolation voltage greater than 1.5kV, 1*1 inch international standard, industrial grade, TD6 series module power efficiency up to 83%, compatible with URA2405YMD-6WR3, DIP:25.4*25.4*10mm

TL7712A One SVS with Programmable Time Delay for 12V Systems

The output drive capability reaches 28V±1.6A, micro stepper motor driver chip with built-in converter and over-current protection

TLV1117 Single Output LDO, 800mA, Fixed and Adjustable Voltage, Internal Current Limit, Thermal Protection

The MC34152/MC33152 are dual non-inverting high-speed drivers designed for applications requiring low-current digital signals to drive large capacitive loads at high slew rates. These devices feature low input current making them compatible with CMOS/LSTTL logic, input hysteresis for fast output switching independent of input transition time, and two high current totem-pole outputs ideal for driving power MOSFETs. An undervoltage lockout with hysteresis is also included to prevent incorrect system operation at low supply voltages. Typical applications include switching power supplies, DC-DC converters, capacitive charge pump doublers/inverters, and motor controllers. This device features dual-row plug-in and surface mount encapsulation.

The FAN3223-25 ​​series of dual 4-A gate drivers provides high peak current pulses with short switching intervals for driving N-channel enhancement mode MOSFETs in low-side switching applications. The driver offers TTL or CMOS input thresholds. Internal circuitry holds the output low until the supply voltage is within operating range, providing undervoltage lockout. In addition, these drivers feature matched internal propagation delays between the A and B channels, making them suitable for applications requiring tightly clocked dual gate drivers, such as synchronous rectifiers. This also enables the parallel connection of the two drivers, effectively doubling the current capability to drive one MOSFET. The FAN322X driver integrates the MillerDrive structure for the final output stage. This bipolar MOSFET combination provides high current during the Miller plateau phase of the MOSFET turn-on/turn-off process to minimize switching losses while providing rail-to-rail voltage swing and reverse current capability. The FAN3223 provides two back drivers and the FAN3224 provides two non-back drivers. Each device has dual independent enable pins that default to an on state if left unconnected. In the FAN3225, each channel has two inputs of opposite polarity and can be configured as non-inverting or inverting with selectable enable using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs so that the output pulls low to keep the power MOSFETs off.

Simple Reset / Power On Reset

TLV743P 300-mA Low-Dropout (LDO) Regulator

-

TPS62000 Adjustable 600mA 95% Efficient Step-Down Converter