Power chip

40V Bidirectional High Accuracy Current Sense Amplifier with Picoamp Input Bias Current and Enable Pin 6-SC70 -40 to 125

-

TPS2513 USB Dedicated Charging Port Controller

LM1085 3A Fixed/Adjustable Output Linear Regulator

Power module Isolated positive and negative dual output; input voltage: 15VDC; output voltage: ±12VDC; output current (maximum value): ±83mA; output power: 2W; isolation voltage 1500VDC

TPS2051B Single Current Limiting Power Distribution Switch

TPS65023 6-channel power management IC (PMIC) with 3 DC/DCs, 3 LDOs, I2C interface and DVS

LP38501-ADJ 3-A FlexCap Low-Dropout Linear Regulator for 2.7-V to 5.5-V Input

Input/output isolation withstand voltage: 1000VDC 0.5mA 1Minute\nOutput ripple (20MHz bandwidth): 80mVp-p Max\nOutput noise (20MHz bandwidth): 100mVp-p Max\nInput voltage: +12VDC (9VDC~36VDC) \nOutput voltage: +3.3VDC±2%, output current: +3.03A Max\nEfficiency: 76%Min\nWorking case temperature: -25°C~+85°C\nStorage temperature: -25°C ~+125°C\nHeat dissipation method: natural cooling, no need to add a radiator\nHas good shielding interference performance and electromagnetic compatibility, short circuit protection, self-recovery and other functions.

Input/output isolation withstand voltage: 1000VDC 0.5mA 1Minute\nOutput ripple (20MHz bandwidth): 80mVp-p Max\nOutput noise (20MHz bandwidth): 100mVp-p Max\nInput voltage: +12VDC (9VDC~36VDC) \nOutput voltage: +3.3VDC±2%, output current: +3.03A Max\nEfficiency: 76%Min\nWorking case temperature: -25°C~+85°C\nStorage temperature: -25°C ~+125°C\nHeat dissipation method: natural cooling, no need to add a radiator\nHas good shielding interference performance and electromagnetic compatibility, short circuit protection, self-recovery and other functions.

16-Cell Battery Monitor with Passive Cell Balancing 80-TQFP -40 to 105

The FAN73711 is a monolithic high-side gate-drive IC that can drive high-speed MOSFETs and IGBTs operating up to +600 V. It has a buffered output stage with all NMOS transistors designed for high pulse current drive capability and minimal cross-conduction. ON Semiconductor's high-voltage process and common-mode interference suppression technology provide stable operation of the high-side driver under high dv/dt interference conditions. Advanced level shifting circuitry provides high side gate driver operation up to VS=-9.8 V (typ) for VBS=15 V. A UVLO circuit prevents fault operation when VBS is below a specified threshold voltage. The high current and low output voltage drop characteristics make this device suitable for maintenance and energy recovery circuit switching drivers in plasma display panels, motor drive inverters, switching power supplies, and high power DC-DC converter applications.