Power chip

600V, single channel driver IC, gate driver supply voltage range: 10V to 20V

TPS60402 60mA Charge Pump Voltage Inverter with Fixed 50kHz Operation

PTH08T220W 16A output 4.5V to 14V input non-isolated wide output regulated power module with TurboTrans technology

1W, constant voltage input, isolation, 24V to 5V, suitable for data exchange circuits, communication isolation, etc.

Isolation voltage 3000VDC, nominal voltage = 5V, maximum current 200mA, full load efficiency 70%\r\nDC to DC, constant voltage input isolation unregulated single output.

0.65uA ultra-low static power consumption, 500mA current output regulated LDO

LP5912 Ultralow Noise, 500mA Linear Regulator 6-WSON for RF and Analog Circuits

Isolated single-channel regulated output; input voltage: 5VDC; output voltage: 5VDC; output current (maximum value): 200mA; output power: 1W; isolation voltage 3000VDC 19.6x6x10

24V input, isolated dual 5V output, 2Watt, isolated 1500Vdc

Output Type: Fixed Output Polarity: Positive Maximum Input Voltage: 30V Output Voltage: 3.3V Output Current: 100mA

The NCP1341 is a highly integrated quasi-resonant flyback controller for designing high performance off-line power converters. The NCP1341 has an integrated active X2 capacitor discharge function, which can achieve a no-load power consumption of less than 30 mW. The quasi-resonant current mode flyback stage features a proprietary valley lockout circuit that ensures stable valley switching. The system operates down to the 6th valley and transitions to frequency foldback mode to reduce switching losses. As the load decreases further, the NCP1341 enters silence skip mode to manage power delivery. The NCP1341 integrates Power Excursion Mode (PEM) to minimize transformer size in designs requiring high transient load capabilities. If transient load capability is not required, the NCP1340 performs and functions the same as without the PEM. To help ensure converter robustness, the NCP1341 implements several key protection features such as internal under-voltage detection, non-dissipative over-power protection (OPP) that guarantees a constant maximum output power at any input voltage, a lockout via a dedicated pin Stored overvoltage and NTC-ready high-temperature protection, along with line removal detection, safely discharges the X2 capacitor when the line is removed.

BQ25570 Ultra-low power harvesting power management IC with boost charger and nanopower buck converter