Power chip

Isolated positive and negative dual output; input voltage: 9~36VDC; output voltage: ±5VDC; output current (maximum value): ±1000mA; output power: 10W; isolation voltage 1500VDC

TPS61085T 18.5-V, 2-A, 650-kHz, 1.2-MHz Step-Up DC-DC Converter with Forced PWM Mode (Extended Temperature Range)

The NCV4295C is a monolithically integrated low-drain voltage regulator with 30 mA output current capability using TSOP–5 encapsulation. Output voltage accuracy is within ±4.0%, with a maximum drain voltage of 250 mV and an input of up to 45 V. The low quiescent current feature typically draws only 160 µA at a 1 mA load. The power-fail output will drive low when the output is undervoltage. This part is suitable for automotive and all battery powered microprocessor devices. The regulator protects against battery reverse, short circuit, and thermal overload conditions.

Power module@isolated power module, input range DC36~72V/2,1, output 5V, 20W, isolation voltage greater than 1.5kV, 1*1 inch international standard, industrial grade, T_YMD-20WR3 series module power efficiency up to 90%, compatible VRB4805YMD-20WR3, DIP, 25.4*25.4*12mm

Multi-Chemistry High Cell Count Battery Fuel Gauge Integrating Very Rare Discharge Module 14-TSSOP -40 to 85

High voltage 600V, single phase, high current, high and low side gate driver, MOSFETs or IGBTs pre-driver

REG113 400mA, Low Noise, Low Dropout Voltage Regulator

300mA LDO

Power module Isolated positive and negative dual output; input voltage: 12VDC; output voltage: ±15VDC; output current (maximum value): ±33mA; output power: 1W; isolation voltage 3000VDC

3-Phase-Gauge-IC-40-LFCSP-WQ (6x6)