Memory chip

512Mbit, SPI Flash, 3V, Macronix, MXIC

1K-Bit Serial EPROM with SDQ Interface 3-TO-92 0 to 70

The CAT24C04 is an EEPROM serial 2-Kb I2C device internally organized as 32 pages of 16 bytes each. The device supports standard (100 kHz) protocol as well as fast (400 kHz) I2C protocol. Data is written by providing a start address, then loading 1 to 16 consecutive bytes into the page write cache, and then writing all the data to non-volatile memory in an internal write cycle. The way to read data is: provide the start address, then move out the data in order, and automatically increment the internal address count at the same time. External address pins enable addressing of up to four CAT24C04 devices on the same bus.

512Kbit, I2C interface, working voltage: 1.7V~5.5V

The CAV24C02 is an EEPROM serial 2-Kb I2C - Automotive Grade device internally organized as 16 pages of 16 bytes each. The device supports standard (100 kHz) protocol as well as fast (400 kHz) I2C protocol. Data is written by providing a start address, then loading 1 to 16 consecutive bytes into the page write cache, and then writing all the data to non-volatile memory in an internal write cycle. The way to read data is: provide the start address, then move out the data in order, and automatically increment the internal address count at the same time. External address pins enable addressing of up to eight CAV24C02 devices on the same bus.

The CAV24C64 is a 64-kb I2C serial EEPROM device internally organized as 8192 words of 8 bits each. It has a 32-byte page write cache and supports Fast (100 kHz) and Fast (400 kHz) I2C protocols. External address pins make it possible to place up to eight CAV24C64 devices on the same bus.