Logic device/transceiver/encoder

Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
Beschrijving
64711 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
Beschrijving
57591 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
4-Channel, 2-Input, 2V to 5.5V NOR Gate 14-SOIC -40 to 125
Beschrijving
89031 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
4-Channel, 4-Input, 2V to 6V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 85
Beschrijving
91329 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
4-Channel, 2-Input, 3V to 5.5V OR Gate 16-SOIC -40 to 85
Beschrijving
76471 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
4-Channel, 2-Input, 3V to 18V NAND Gate 14-TSSOP -55 to 125
Beschrijving
60630 PCS
Op voorraad
Onderdeel nummer
rochester
Fabrikanten
Beschrijving
63583 PCS
Op voorraad
Onderdeel nummer
ADI
Fabrikanten
Beschrijving
68748 PCS
Op voorraad
Onderdeel nummer
Nexperia
Fabrikanten
Beschrijving
56169 PCS
Op voorraad
Onderdeel nummer
onsemi (Ansemi)
Fabrikanten
MM74HCT573 Octal D-type Latch and MM74HCT574 Octal D-type Flip-Flop are manufactured with advanced silicon gate CMOS technology, which has the inherent advantages of low power consumption and wide power supply range, and has LS-TTL input and output characteristics, and realizes pin output compatible. The 3-state outputs can drive 15 LS-TTL loads. All inputs are protected from electrostatic discharge damage by internal diodes to VCC and ground. When the MM74HCT573 latch enable input is high, the Q output will follow the D input. When Latch Enable goes low, the data at the D input remains at the output until Latch Enable goes high again. When a high logic level is applied to the output control input, all outputs go into a high impedance state, regardless of what signals are present at the other inputs and the state of the storage element. The MM74HCT574 is a rising edge triggered flip-flop. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a positive-going transition of the clock (CK) input. When a high logic level is applied to the output control (OC) input, all outputs go into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The MM74HCT device is suitable for interfacing between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
Beschrijving
83673 PCS
Op voorraad
Onderdeel nummer
onsemi (Ansemi)
Fabrikanten
Beschrijving
95769 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
Octal Bus Transceiver 20-SSOP 0 to 70
Beschrijving
84156 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
Octal Bus Transceiver and Registers with 3-State Outputs 24-TSSOP -40 to 85
Beschrijving
90163 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
16-Bit Transparent D-Latch with 3-State Output 48-TVSOP -40 to 85
Beschrijving
52214 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
Beschrijving
85670 PCS
Op voorraad
Onderdeel nummer
TI (Texas Instruments)
Fabrikanten
IEEE Std 1149.1 (JTAG) Boundary-Scan Test Set 24-SOIC 0 to 70 with Octal Bus Transceivers
Beschrijving
54209 PCS
Op voorraad
Onderdeel nummer
ADI/MAXIM (MAXIM)
Fabrikanten
Beschrijving
85798 PCS
Op voorraad
Onderdeel nummer
ADI/MAXIM (MAXIM)
Fabrikanten
Beschrijving
93941 PCS
Op voorraad
Onderdeel nummer
ADI/MAXIM (MAXIM)
Fabrikanten
Beschrijving
63060 PCS
Op voorraad
Onderdeel nummer
NXP (NXP)
Fabrikanten
Beschrijving
58949 PCS
Op voorraad