Logic device/transceiver/encoder

The MC10/100EP90 is a triple ECL - LVPECL/PECL converter. The device receives a differential LVECL or ECL signal and converts it to a differential LVPECL or PECL output signal. A VBB output is provided for single-ended LVECL or ECL signals at the interface input. If a single-ended input is to be used, the VBB output should be connected to the D input. A valid signal will then drive this D input. If the VBB pin is used, it should be bypassed to ground with a 0.01 F capacitor. The VBB output is suitable as a switching reference for the EP90 in single-ended input switching conditions, so this pin only sources/sinks 0.5mA. For level translation, the EP90 requires three power rails. The VCC power supply should be connected to the positive power supply, and the VEE should be connected to the negative power supply. The 100 Series includes temperature compensation.

8-Bit LVTTL-GTLP Adjustable Edge Rate Registered Transceiver with Independent LVTTL Port and Feedback Path 48-TSSOP -40 to 85

High Speed ​​CMOS Logic 4 Bit x 16 Word FIFO Registers 16-PDIP -55 to 125