Logic device/transceiver/encoder

The NLSX5004 is a 4-bit configurable dual-supply auto-sensing bi-directional level shifter that does not require a direction control pin. Ports A and B are designed to track two different supply rails, VCCA and VCCB, respectively. Independent VCCA and VCCB power rails, configurable from 0.9 V to 3.6 V. The NLSX5004 has a dynamic high output current capability, the converter is capable of driving high capacitive loads. An enable input pin is provided that can be used to reduce power consumption. The EN pin can be used to 3-state both I/O ports to disable both ports, significantly reducing supply current to VCC and VL. These pins are referenced to the VCCA supply. The NLSX5004 has an active high enable (EN).

Enhanced Product 32768 X 18 Synchronous Fifo Memory 80-LQFP -55 to 125

The MM74HC374 high-speed octal D-type flip-flop utilizes an advanced silicon-gate CMOS process. The device has the high noise immunity and low power consumption of a standard CMOS integrated circuit, plus the ability to drive 15 LS-TTL loads. Due to their large output drive capability and 3-state nature, these devices are suitable for interfacing bus lines in bus organizing systems. These devices are positive-edge triggered flip-flops. When the clock (CK) input transitions positively, data from the D input that meets the setup and hold time requirements is transferred to the Q output. Applying a high logic level to the output control (OC) input puts all outputs into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The 74HC logic family is compatible with the standard 74LS logic family in speed, functionality, and pinout. All inputs are protected against damage due to electrostatic charge by internal diodes clamped to VCC and ground.

Low Power Dual Positive Edge Triggered D-Type Flip-Flop 8-DSBGA -40 to 85