Logic device/transceiver/encoder

The MM74HC374 high-speed octal D-type flip-flop utilizes an advanced silicon-gate CMOS process. The device has the high noise immunity and low power consumption of a standard CMOS integrated circuit, plus the ability to drive 15 LS-TTL loads. Due to their large output drive capability and 3-state nature, these devices are suitable for interfacing bus lines in bus organizing systems. These devices are positive-edge triggered flip-flops. When the clock (CK) input transitions positively, data from the D input that meets the setup and hold time requirements is transferred to the Q output. Applying a high logic level to the output control (OC) input puts all outputs into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The 74HC logic family is compatible with the standard 74LS logic family in speed, functionality, and pinout. All inputs are protected against damage due to electrostatic charge by internal diodes clamped to VCC and ground.

SN74HC365 Hex Buffer and Line Driver with 3-State Outputs

CMOS Dual 4-Stage Static Shift Register 16-SOIC -55 to 125

6-Channel, 2V to 6V Inverter 16-TSSOP -55 to 125

The 74LVXC3245 is a 24-pin dual-supply, octal configurable voltage interface transceiver for PCMCIA and other real-time configurable I/O applications. The VCCA pin accepts a 3V supply level; the A port is a dedicated 3V port. The VCCB pin accepts a 3V-5V supply level. The B port is configured to track the VCCB supply level. A 5V level on the VCCB pin configures the I/O pin at 5V and a 3V VCCB configures the I/O pin at 3V. The A port should be connected to the 3V main system, and the B port should be connected to the card slot. The device will allow the VCCB supply pin and I/O pins on Port B to float when OE is high. This feature is required for bidirectional data buffering with the PCMCIA slot to allow insertion and removal of PCMCIA cards during normal operation. The transmit/receive (T/R) input determines the data flow. A transfer (active high) enables data transfer from the A port to the B port. Receive (active low) enables data transfer from the B port to the A port.

The NC7SV74 is a single-channel D-type CMOS flip-flop with preset and clear functions, belonging to Fairchild's TinyLogic Ultra Low Power-A (ULP-A) series with space-saving US8 and MicroPakencapsulation. The ULP-A is ideal for applications requiring very high speed, high drive and low power consumption. This product is designed for a wide low voltage operating range (0.9 V to 3.6 V of V

SN74LVC2G157 Single 2-Line to 1-Line Data Selector/Multiplexer

CMOS Hex Non-inverting Buffer/Translator 16-SOIC -55 to 125