VS-10AWT10-E3

Product Overview

Category: Electronic Component
Use: Power supply
Characteristics: High efficiency, compact size, reliable performance
Package: Surface mount
Essence: Voltage regulator
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

Input Voltage: 4.5V to 28V
Output Voltage: 0.8V to 24V
Output Current: 10A
Efficiency: Up to 95%
Operating Temperature: -40°C to 125°C
Package Type: DFN-10

Detailed Pin Configuration

VIN (Input voltage)
GND (Ground)
EN (Enable)
FB (Feedback)
NC (No connection)
NC (No connection)
NC (No connection)
VOUT (Output voltage)
VOUT (Output voltage)
PG (Power good)

Functional Features

Wide input voltage range
Adjustable output voltage
Overcurrent protection
Thermal shutdown
Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide input voltage range - Reliable performance

Disadvantages: - Limited output current compared to some alternatives

Working Principles

The VS-10AWT10-E3 is a voltage regulator that takes an input voltage and provides a stable output voltage, ensuring a consistent power supply for electronic devices. It achieves this through internal circuitry that adjusts the output voltage based on the feedback received from the load.

Detailed Application Field Plans

The VS-10AWT10-E3 is suitable for various applications including: - Industrial automation - Telecommunications equipment - Consumer electronics - Automotive systems - Power distribution systems

Detailed and Complete Alternative Models

VS-12BWT20-E4: Higher output current of 20A
VS-8CWT5-E2: Lower output current of 5A, smaller package size

This comprehensive entry provides detailed information about the VS-10AWT10-E3, covering its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van VS-10AWT10-E3 in technische oplossingen

Sure, here are 10 common questions and answers related to the application of VS-10AWT10-E3 in technical solutions:

What is the maximum operating temperature for VS-10AWT10-E3?
- The maximum operating temperature for VS-10AWT10-E3 is 125°C.
What is the typical application of VS-10AWT10-E3?
- VS-10AWT10-E3 is commonly used as a thermal interface material for electronic components such as CPUs, GPUs, and power electronics.
Is VS-10AWT10-E3 electrically conductive?
- No, VS-10AWT10-E3 is electrically insulating, making it suitable for applications where electrical isolation is required.
Can VS-10AWT10-E3 be used for outdoor applications?
- Yes, VS-10AWT10-E3 has good weather resistance and can be used for outdoor applications.
What is the shelf life of VS-10AWT10-E3?
- The shelf life of VS-10AWT10-E3 is typically 24 months when stored in its original packaging at room temperature.
Does VS-10AWT10-E3 require any special surface preparation before application?
- It is recommended to clean the surfaces with a suitable solvent to ensure proper adhesion of VS-10AWT10-E3.
Can VS-10AWT10-E3 be reworked or removed after application?
- Yes, VS-10AWT10-E3 can be reworked or removed using appropriate cleaning methods and solvents.
What is the thermal conductivity of VS-10AWT10-E3?
- The thermal conductivity of VS-10AWT10-E3 is typically 1.0 W/mK.
Is VS-10AWT10-E3 compatible with silicone-based materials?
- Yes, VS-10AWT10-E3 is compatible with silicone-based materials and does not cause any adverse reactions.
Can VS-10AWT10-E3 be used in automotive applications?
- Yes, VS-10AWT10-E3 is suitable for automotive applications where thermal management is crucial, such as in power modules and LED lighting systems.