Zie specificaties voor productdetails.
SE40PDHM3_A/I
Product Overview
- Category: Electronic Component
- Use: Power Management
- Characteristics: High efficiency, compact design
- Package: Surface-mount package
- Essence: Regulates power supply
- Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications
- Input Voltage: 4.5V to 36V
- Output Voltage: 1.2V to 28V
- Output Current: 3A
- Efficiency: Up to 95%
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: VIN (Input Voltage)
- Pin 2: GND (Ground)
- Pin 3: EN (Enable)
- Pin 4: FB (Feedback)
- Pin 5: SW (Switch)
- Pin 6: VOUT (Output Voltage)
Functional Features
- Integrated high-side and low-side power MOSFETs
- Adjustable output voltage
- Overcurrent and thermal protection
- Soft-start capability
- Synchronous rectification for high efficiency
Advantages
- Wide input voltage range
- High efficiency
- Compact size
- Comprehensive protection features
- Flexible output voltage adjustment
Disadvantages
- Higher cost compared to non-integrated solutions
- Limited output current compared to larger power modules
Working Principles
The SE40PDHM3_A/I is a synchronous step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It utilizes pulse-width modulation (PWM) to control the power switches and efficiently deliver power to the load.
Detailed Application Field Plans
- Industrial automation
- Automotive electronics
- Telecommunications equipment
- Portable electronic devices
- LED lighting systems
Detailed and Complete Alternative Models
- SE30PDHM2_B/I
- Similar specifications with lower output current
- SE50PDHM4_C/I
- Higher output current and wider input voltage range
- SE25PDHM1_D/I
- Lower output current with smaller footprint
This entry provides comprehensive information about the SE40PDHM3_A/I, including its product overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SE40PDHM3_A/I in technische oplossingen
What is SE40PDHM3_A/I?
- SE40PDHM3_A/I is a high-performance sensor module designed for industrial applications, capable of measuring various environmental parameters.
What are the key features of SE40PDHM3_A/I?
- The key features include high accuracy, robust construction, multiple sensor options, and compatibility with various communication protocols.
How does SE40PDHM3_A/I measure environmental parameters?
- SE40PDHM3_A/I uses advanced sensing technology to measure parameters such as temperature, humidity, pressure, and air quality.
What are the typical applications of SE40PDHM3_A/I?
- Typical applications include HVAC systems, cleanrooms, weather stations, and industrial automation where precise environmental monitoring is required.
Is SE40PDHM3_A/I compatible with different control systems?
- Yes, SE40PDHM3_A/I is designed to be compatible with various control systems and can be easily integrated into existing setups.
What communication protocols does SE40PDHM3_A/I support?
- SE40PDHM3_A/I supports commonly used protocols such as Modbus, BACnet, and analog output, making it versatile for different technical solutions.
Can SE40PDHM3_A/I be used in outdoor environments?
- Yes, SE40PDHM3_A/I is suitable for outdoor use, provided it is installed in a protective housing to shield it from extreme weather conditions.
What maintenance is required for SE40PDHM3_A/I?
- Regular calibration and cleaning of the sensors are recommended to ensure accurate and reliable measurements over time.
Does SE40PDHM3_A/I have built-in diagnostics for troubleshooting?
- Yes, SE40PDHM3_A/I includes built-in diagnostics to aid in troubleshooting and identifying any potential issues with the sensor module.
Is SE40PDHM3_A/I compliant with industry standards and regulations?
- Yes, SE40PDHM3_A/I complies with relevant industry standards and regulations, ensuring its suitability for technical solutions in various sectors.