Zie specificaties voor productdetails.
P6SMB300A-E3/5B
Product Overview
Category
The P6SMB300A-E3/5B belongs to the category of transient voltage suppressor (TVS) diodes.
Use
It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
Characteristics
- Fast response time
- Low clamping voltage
- High surge current capability
Package
The P6SMB300A-E3/5B is typically available in a DO-214AA (SMB) package.
Essence
The essence of the P6SMB300A-E3/5B lies in its ability to provide reliable overvoltage protection for electronic circuits.
Packaging/Quantity
It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Standoff Voltage: 256V
- Breakdown Voltage: 300V
- Maximum Clamping Voltage: 488V
- Peak Pulse Current: 53.5A
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The P6SMB300A-E3/5B typically has two pins, with the cathode connected to the ground and the anode connected to the protected circuit.
Functional Features
- Bi-directional TVS diode
- Low incremental surge resistance
- RoHS compliant
Advantages and Disadvantages
Advantages
- Provides effective protection against voltage transients
- Fast response time ensures minimal impact on the protected circuit
- RoHS compliance supports environmental sustainability
Disadvantages
- May require additional circuitry for comprehensive overvoltage protection
- Clamping voltage may still allow some transient energy to pass through
Working Principles
The P6SMB300A-E3/5B works by diverting excessive transient current away from the protected circuit, thereby limiting the voltage across it.
Detailed Application Field Plans
The P6SMB300A-E3/5B is commonly used in: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the P6SMB300A-E3/5B include: - P6SMB220A-E3/52 - P6SMB350A-E3/5B - P6SMB400A-E3/5B - P6SMB440A-E3/5B
In conclusion, the P6SMB300A-E3/5B transient voltage suppressor diode offers reliable overvoltage protection with its fast response time, low clamping voltage, and high surge current capability. Its application spans across various industries, and it is complemented by alternative models catering to different voltage requirements.
Word count: 366
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van P6SMB300A-E3/5B in technische oplossingen
What is the maximum peak pulse power dissipation of P6SMB300A-E3/5B?
- The maximum peak pulse power dissipation of P6SMB300A-E3/5B is 600 watts.
What is the breakdown voltage of P6SMB300A-E3/5B?
- The breakdown voltage of P6SMB300A-E3/5B is 267V.
What is the typical clamping voltage of P6SMB300A-E3/5B?
- The typical clamping voltage of P6SMB300A-E3/5B is 486V at 10A.
What is the operating temperature range of P6SMB300A-E3/5B?
- The operating temperature range of P6SMB300A-E3/5B is -55°C to +150°C.
What are the applications of P6SMB300A-E3/5B?
- P6SMB300A-E3/5B is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.
What is the package type of P6SMB300A-E3/5B?
- P6SMB300A-E3/5B is available in a DO-214AA (SMB) package.
What is the reverse stand-off voltage of P6SMB300A-E3/5B?
- The reverse stand-off voltage of P6SMB300A-E3/5B is 300V.
What are the key features of P6SMB300A-E3/5B?
- Some key features of P6SMB300A-E3/5B include low incremental surge resistance, fast response time, and high reliability.
Is P6SMB300A-E3/5B RoHS compliant?
- Yes, P6SMB300A-E3/5B is RoHS compliant.
What are the recommended soldering conditions for P6SMB300A-E3/5B?
- The recommended soldering conditions for P6SMB300A-E3/5B include a peak temperature of 260°C for 10 seconds maximum.