Vishay Semiconductor Diodes Division
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MBRB2560CT-E3/45
Details bekijken DataSheets

MBRB2560CT-E3/45

Introduction

The MBRB2560CT-E3/45 is a diode belonging to the category of Schottky Rectifier. This product is widely used in various electronic applications due to its unique characteristics and advantages.

Basic Information Overview

  • Category: Schottky Rectifier
  • Use: Power rectification in electronic circuits
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: TO-263AB
  • Essence: Efficient power conversion
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on supplier

Specifications

  • Voltage - DC Reverse (Vr) (Max): 60V
  • Current - Average Rectified (Io): 25A
  • Voltage - Forward (Vf) (Max) @ If: 650mV @ 15A
  • Speed: Fast recovery

Detailed Pin Configuration

The MBRB2560CT-E3/45 has a standard TO-263AB package with three pins: Anode, Cathode, and Gate.

Functional Features

  • High efficiency power rectification
  • Low forward voltage drop
  • Fast switching speed

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low power loss
  • Fast response time

Disadvantages

  • Higher cost compared to standard rectifiers
  • Sensitive to overvoltage conditions

Working Principles

The MBRB2560CT-E3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB2560CT-E3/45 is commonly used in: - Switching power supplies - Voltage clamping circuits - Reverse polarity protection circuits

Detailed and Complete Alternative Models

  • MBRB1545CTG: Similar specifications, lower current rating
  • MBR20100CT: Higher voltage rating, similar current capacity

In conclusion, the MBRB2560CT-E3/45 Schottky Rectifier offers high efficiency and fast switching speed, making it suitable for various power rectification applications in electronic circuits.

[Word count: 314]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MBRB2560CT-E3/45 in technische oplossingen

  1. What is the MBRB2560CT-E3/45 diode used for?

    • The MBRB2560CT-E3/45 diode is commonly used as a rectifier in power supply and voltage regulation applications.

  2. What are the key specifications of the MBRB2560CT-E3/45 diode?

    • The MBRB2560CT-E3/45 is a Schottky diode with a maximum average forward current of 25A, a reverse voltage of 60V, and a low forward voltage drop.

  3. How does the MBRB2560CT-E3/45 diode compare to other similar diodes?

    • The MBRB2560CT-E3/45 offers lower forward voltage drop and faster switching compared to standard silicon diodes, making it suitable for high-frequency applications.

  4. Can the MBRB2560CT-E3/45 diode be used in automotive applications?

    • Yes, the MBRB2560CT-E3/45 diode is often used in automotive electronics for its high efficiency and fast switching characteristics.

  5. What are the typical thermal considerations when using the MBRB2560CT-E3/45 diode?

    • Proper heat sinking and thermal management are important to ensure the MBRB2560CT-E3/45 diode operates within its specified temperature range for optimal performance and reliability.

  6. Are there any application notes or reference designs available for the MBRB2560CT-E3/45 diode?

    • Yes, manufacturers often provide application notes and reference designs for using the MBRB2560CT-E3/45 diode in various technical solutions, which can be helpful for design engineers.

  7. What are the common failure modes of the MBRB2560CT-E3/45 diode?

    • Common failure modes include thermal overstress, reverse voltage breakdown, and excessive forward current, so proper circuit protection and design considerations are important.

  8. Can the MBRB2560CT-E3/45 diode be used in high-frequency switching power supplies?

    • Yes, the MBRB2560CT-E3/45 diode's fast switching characteristics make it well-suited for high-frequency switching power supply applications.

  9. What are the recommended layout and PCB design considerations for the MBRB2560CT-E3/45 diode?

    • Proper layout and PCB design should minimize parasitic inductance and capacitance, optimize thermal management, and ensure proper electrical connections for reliable performance.

  10. Where can I find detailed datasheets and application information for the MBRB2560CT-E3/45 diode?

    • Detailed datasheets and application information for the MBRB2560CT-E3/45 diode can be found on the manufacturer's website or through authorized distributors.