GP15JHE3/54

Product Overview

Category: Diode
Use: Rectification and voltage regulation
Characteristics: High efficiency, low forward voltage drop
Package: DO-214AC
Essence: Silicon rectifier diode
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Forward Voltage Drop: 0.7V
Reverse Voltage: 150V
Average Rectified Current: 1.5A
Peak Surge Current: 30A
Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The GP15JHE3/54 diode has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

Efficient rectification of AC to DC
Low forward voltage drop for minimal power loss
High surge current capability for robust performance

Advantages

High efficiency
Low forward voltage drop
Robust surge current capability

Disadvantages

Relatively limited average rectified current compared to higher-rated diodes
Sensitive to reverse voltage polarity

Working Principles

The GP15JHE3/54 diode operates on the principle of semiconductor junction rectification. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts current, allowing it to act as a one-way valve for electrical current.

Detailed Application Field Plans

This diode is commonly used in various electronic circuits such as power supplies, battery chargers, and voltage regulators. Its high efficiency and low forward voltage drop make it suitable for applications where energy efficiency is crucial.

Detailed and Complete Alternative Models

1N5819: Similar characteristics and package
FR157: Comparable specifications and use case

Note: The provided alternative models are for reference and may require further evaluation based on specific application requirements.

This entry provides comprehensive information about the GP15JHE3/54 diode, including its category, use, characteristics, package details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van GP15JHE3/54 in technische oplossingen

What is the GP15JHE3/54 component used for in technical solutions?
- The GP15JHE3/54 is a fast switching rectifier diode commonly used in power supply and voltage regulation circuits.
What are the key specifications of the GP15JHE3/54?
- The GP15JHE3/54 has a maximum repetitive reverse voltage of 150V, a forward current of 1.0A, and a forward voltage drop of around 1V at the rated current.
Can the GP15JHE3/54 be used in high-frequency applications?
- Yes, the GP15JHE3/54 is suitable for high-frequency applications due to its fast switching characteristics.
What are the typical applications of the GP15JHE3/54 in technical solutions?
- The GP15JHE3/54 is commonly used in switch-mode power supplies, freewheeling diodes, and general rectification circuits.
Does the GP15JHE3/54 require a heatsink in certain applications?
- Depending on the operating conditions and power dissipation, a heatsink may be required to ensure proper thermal management.
What are the temperature considerations for the GP15JHE3/54 in technical solutions?
- The GP15JHE3/54 has a maximum junction temperature of 150°C, so it's important to consider thermal management to avoid exceeding this limit.
Is the GP15JHE3/54 suitable for automotive or industrial applications?
- Yes, the GP15JHE3/54 is suitable for both automotive and industrial applications due to its robust construction and reliability.
What are the potential failure modes of the GP15JHE3/54 in technical solutions?
- Common failure modes include overcurrent stress, excessive temperature, and voltage transients. Proper circuit protection and design considerations can mitigate these risks.
Are there any recommended alternative components to the GP15JHE3/54 for specific applications?
- Depending on the specific requirements of the application, alternative rectifier diodes with similar specifications from different manufacturers may be considered.
Where can I find detailed application notes or reference designs using the GP15JHE3/54?
- Detailed application notes and reference designs for the GP15JHE3/54 can often be found in the datasheet provided by the manufacturer, as well as in technical literature and online resources related to power electronics and circuit design.