Torex Semiconductor Ltd
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
XC6122E731ER-G
Details bekijken DataSheets

XC6122E731ER-G

Product Overview

Category

XC6122E731ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122E731ER-G is available in a small surface-mount package.

Essence

The essence of XC6122E731ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6122E731ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 100mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E731ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Excellent voltage regulation
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Relatively higher cost compared to some alternatives

Working Principles

XC6122E731ER-G operates by regulating the input voltage to provide a stable and regulated output voltage. It utilizes internal circuitry to monitor and adjust the output voltage based on the input voltage and load conditions.

Detailed Application Field Plans

XC6122E731ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E731ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and may vary in terms of package type, input/output voltage ranges, and other specifications.

In conclusion, XC6122E731ER-G is a compact and efficient voltage regulator with excellent voltage regulation capabilities. It is widely used in various electronic applications and offers several advantages such as low power consumption and built-in protection features. However, it has limitations in terms of output current capacity and cost compared to some alternatives.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6122E731ER-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of XC6122E731ER-G in technical solutions:

  1. Question: What is XC6122E731ER-G?
    Answer: XC6122E731ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E731ER-G?
    Answer: The operating voltage range of XC6122E731ER-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6122E731ER-G work?
    Answer: XC6122E731ER-G works by comparing the input voltage with a reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6122E731ER-G?
    Answer: XC6122E731ER-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate a low voltage condition.

  5. Question: Can XC6122E731ER-G be used in battery-powered applications?
    Answer: Yes, XC6122E731ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the accuracy of XC6122E731ER-G?
    Answer: XC6122E731ER-G has a typical detection voltage accuracy of ±1.0%.

  7. Question: Can XC6122E731ER-G be used in automotive applications?
    Answer: Yes, XC6122E731ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Does XC6122E731ER-G have built-in hysteresis?
    Answer: Yes, XC6122E731ER-G has a built-in hysteresis of typically 5% to prevent oscillation caused by voltage fluctuations near the detection threshold.

  9. Question: What is the temperature range of XC6122E731ER-G?
    Answer: XC6122E731ER-G has an operating temperature range of -40°C to +85°C.

  10. Question: Can XC6122E731ER-G be used in space-constrained applications?
    Answer: Yes, XC6122E731ER-G is available in a small SOT-25 package, making it suitable for space-constrained applications where size is a critical factor.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.