Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
TPS64201DBVRG4
Details bekijken DataSheets

TPS64201DBVRG4

Product Overview

Category

The TPS64201DBVRG4 belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators.

Use

This product is primarily used for power management applications, providing a regulated output voltage from an input voltage source.

Characteristics

  • Input Voltage Range: 2.7V to 6V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: Up to 500mA
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +125°C
  • Low Quiescent Current: 50µA (typical)

Package

The TPS64201DBVRG4 comes in a small SOT-23 package, which is a surface-mount device (SMD) package with three pins.

Essence

The essence of this product lies in its ability to efficiently regulate voltage levels, making it suitable for various low-power applications.

Packaging/Quantity

The TPS64201DBVRG4 is typically available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 6V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: Up to 500mA
  • Quiescent Current: 50µA (typical)
  • Switching Frequency: 1.6MHz (typical)
  • Shutdown Current: 0.1µA (typical)
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Overtemperature Protection

Detailed Pin Configuration

The TPS64201DBVRG4 has three pins:

  1. VIN: This pin is used to connect the input voltage source.
  2. GND: This pin is connected to the ground reference.
  3. VOUT: The regulated output voltage is obtained from this pin.

Functional Features

  • Wide input voltage range allows for flexibility in power supply selection.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Low quiescent current enables power-saving operation in standby or idle modes.
  • Thermal shutdown, short-circuit, and overtemperature protection enhance reliability and safety.

Advantages and Disadvantages

Advantages

  • Wide input voltage range provides versatility in various applications.
  • High efficiency results in reduced power consumption and heat generation.
  • Small package size allows for space-saving designs.
  • Integrated protection features enhance system reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • SOT-23 package may require additional thermal management measures in certain scenarios.

Working Principles

The TPS64201DBVRG4 utilizes a switching regulator topology to regulate the output voltage. It employs a pulse-width modulation (PWM) control scheme to adjust the duty cycle of the internal power switch, thereby regulating the output voltage based on the feedback received from the output.

Detailed Application Field Plans

The TPS64201DBVRG4 finds application in various low-power electronic devices, including but not limited to: - Battery-powered portable devices - Wearable electronics - IoT (Internet of Things) devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

  1. TPS64200DBVRG4: Similar specifications and features, but with a lower output current capability.
  2. TPS64202DBVRG4: Similar specifications and features, but with a higher output current capability.
  3. TPS64203DBVRG4: Similar specifications and features, but with adjustable output voltage capability.

These alternative models provide options based on specific requirements and desired performance characteristics.

Word count: 511 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TPS64201DBVRG4 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TPS64201DBVRG4 in technical solutions:

  1. Q: What is the TPS64201DBVRG4? A: The TPS64201DBVRG4 is a high-efficiency, low quiescent current buck-boost converter designed for battery-powered applications.

  2. Q: What is the input voltage range of the TPS64201DBVRG4? A: The TPS64201DBVRG4 has an input voltage range of 2.7V to 5.5V.

  3. Q: What is the output voltage range of the TPS64201DBVRG4? A: The TPS64201DBVRG4 can provide an adjustable output voltage range from 1.8V to 5.5V.

  4. Q: What is the maximum output current of the TPS64201DBVRG4? A: The TPS64201DBVRG4 can deliver up to 1A of output current.

  5. Q: Does the TPS64201DBVRG4 have built-in protection features? A: Yes, the TPS64201DBVRG4 includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  6. Q: Can the TPS64201DBVRG4 operate in both buck and boost modes? A: Yes, the TPS64201DBVRG4 can operate in both buck and boost modes, allowing it to step up or step down the input voltage as needed.

  7. Q: Is the TPS64201DBVRG4 suitable for battery-powered applications? A: Yes, the TPS64201DBVRG4 is specifically designed for battery-powered applications, offering high efficiency and low quiescent current.

  8. Q: What is the typical efficiency of the TPS64201DBVRG4? A: The TPS64201DBVRG4 has a typical efficiency of up to 95% in boost mode and up to 90% in buck mode.

  9. Q: Can the TPS64201DBVRG4 be used in automotive applications? A: Yes, the TPS64201DBVRG4 is suitable for automotive applications as it can operate within the required voltage range and includes protection features.

  10. Q: Are there any evaluation modules or reference designs available for the TPS64201DBVRG4? A: Yes, Texas Instruments provides evaluation modules and reference designs that can help users quickly prototype and implement the TPS64201DBVRG4 in their applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.