Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
TPS54626PWP
Details bekijken DataSheets

TPS54626PWP

Product Overview

Category

The TPS54626PWP belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Wide input voltage range
  • Low output voltage ripple
  • Fast transient response

Package

The TPS54626PWP comes in a small outline package (SOP) with a PowerPAD™ thermally enhanced package.

Essence

The essence of the TPS54626PWP lies in its ability to efficiently regulate voltage in various electronic applications.

Packaging/Quantity

The TPS54626PWP is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 17V
  • Output Voltage Range: 0.6V to 5.5V
  • Output Current: Up to 6A
  • Switching Frequency: 300kHz to 2.5MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TPS54626PWP has the following pin configuration:

  1. VIN: Input voltage pin
  2. PGND: Power ground pin
  3. BOOT: Bootstrap capacitor connection pin
  4. PH: Phase node connection pin
  5. SW: Switching node connection pin
  6. FB: Feedback voltage pin
  7. SS/TR: Soft-start/tracking pin
  8. EN: Enable pin
  9. VSENSE: Current sense pin
  10. AGND: Analog ground pin
  11. VOUT: Output voltage pin

Functional Features

  • Integrated MOSFETs for high efficiency
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start and tracking capability
  • Synchronization capability with external clock

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Fast transient response ensures stability in dynamic load conditions

Disadvantages

  • Relatively high cost compared to some alternative models
  • Requires careful thermal management due to high power density

Working Principles

The TPS54626PWP operates on the principle of pulse width modulation (PWM) to regulate the output voltage. It uses an internal feedback loop to compare the actual output voltage with a reference voltage and adjusts the duty cycle of the switching signal accordingly.

Detailed Application Field Plans

The TPS54626PWP finds application in various fields, including: 1. Industrial automation 2. Telecommunications 3. Consumer electronics 4. Automotive electronics 5. Power supplies

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the TPS54626PWP are: 1. LM2596S-ADJ 2. LT1763-3.3 3. ADP2303ARDZ 4. MP1584EN

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, the TPS54626PWP is a highly efficient voltage regulator with a wide range of applications. Its compact package, adjustable output voltage, and robust protection features make it a popular choice in various electronic circuits. However, its relatively higher cost and thermal management considerations should be taken into account when selecting this product.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TPS54626PWP in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TPS54626PWP in technical solutions:

  1. Q: What is TPS54626PWP? A: TPS54626PWP is a synchronous buck converter integrated circuit (IC) that provides high-efficiency power conversion for various applications.

  2. Q: What is the input voltage range of TPS54626PWP? A: The input voltage range of TPS54626PWP is typically between 4.5V and 17V.

  3. Q: What is the output voltage range of TPS54626PWP? A: The output voltage range of TPS54626PWP can be adjusted from 0.6V to 5.5V using external resistors.

  4. Q: What is the maximum output current of TPS54626PWP? A: TPS54626PWP can deliver a maximum output current of up to 6A.

  5. Q: Is TPS54626PWP suitable for battery-powered applications? A: Yes, TPS54626PWP is suitable for battery-powered applications as it has low quiescent current and supports pulse skipping mode for improved efficiency at light loads.

  6. Q: Does TPS54626PWP have built-in protection features? A: Yes, TPS54626PWP includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can TPS54626PWP operate in a wide temperature range? A: Yes, TPS54626PWP is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  8. Q: What type of package does TPS54626PWP come in? A: TPS54626PWP is available in a 20-pin HTSSOP package, which provides good thermal performance.

  9. Q: Can TPS54626PWP be used in automotive applications? A: Yes, TPS54626PWP is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.

  10. Q: Are there any evaluation boards or reference designs available for TPS54626PWP? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement TPS54626PWP in their applications.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.