Zie specificaties voor productdetails.
TLV2460IDBVTG4
Product Overview
Category: Integrated Circuit (IC)
Use: Operational Amplifier (Op-Amp)
Characteristics: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High precision and accuracy - Small package size - Low noise and distortion
Package: SOT-23-5
Essence: The TLV2460IDBVTG4 is a low-power, rail-to-rail input/output operational amplifier. It is designed for applications that require high precision and accuracy while consuming minimal power.
Packaging/Quantity: The TLV2460IDBVTG4 is available in a small SOT-23-5 package. It is typically sold in reels of 3000 units.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 10MHz
- Slew Rate: 6V/µs
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2460IDBVTG4 has the following pin configuration:
___________
OUT | 1 5 | VCC+
IN+ | 2 4 | IN-
VCC- | 3 3 | NC
|__________|
Functional Features
- Low input offset voltage and bias current for accurate signal amplification.
- Rail-to-rail input and output capability allows for maximum dynamic range.
- Wide supply voltage range enables operation in various power supply configurations.
- Low power consumption extends battery life in portable applications.
- High gain bandwidth product and slew rate ensure fast and accurate signal amplification.
Advantages and Disadvantages
Advantages: - Low power consumption makes it suitable for battery-powered devices. - Rail-to-rail input/output allows for maximum signal swing. - High precision and accuracy ensure reliable performance. - Small package size saves board space in compact designs. - Low noise and distortion result in high-quality signal amplification.
Disadvantages: - Limited number of pins may restrict the number of external components that can be connected directly. - SOT-23-5 package may not be suitable for applications requiring higher power dissipation.
Working Principles
The TLV2460IDBVTG4 is an operational amplifier that amplifies small input signals to a larger output voltage. It operates by comparing the voltage difference between its two input terminals (IN+ and IN-) and amplifying this difference to produce an output voltage. The rail-to-rail input and output capability allows the op-amp to handle signals that are close to the supply voltage limits.
Detailed Application Field Plans
The TLV2460IDBVTG4 is commonly used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Audio amplification 3. Battery-powered instrumentation 4. Portable medical devices 5. Industrial control systems 6. Communication equipment
Detailed and Complete Alternative Models
Some alternative models to the TLV2460IDBVTG4 include: - LM324 - MCP6004 - AD8605 - MAX44246
These alternatives offer similar functionality and characteristics, providing options for different design requirements.
Word count: 386 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TLV2460IDBVTG4 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of TLV2460IDBVTG4:
Q: What is TLV2460IDBVTG4? A: TLV2460IDBVTG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for general-purpose applications.
Q: What is the supply voltage range for TLV2460IDBVTG4? A: The supply voltage range for TLV2460IDBVTG4 is typically between 2.7V and 6V.
Q: What is the input offset voltage of TLV2460IDBVTG4? A: The input offset voltage of TLV2460IDBVTG4 is typically around 1mV.
Q: Can TLV2460IDBVTG4 operate with a single power supply? A: Yes, TLV2460IDBVTG4 can operate with a single power supply as it has rail-to-rail input/output capability.
Q: What is the typical gain bandwidth product of TLV2460IDBVTG4? A: The typical gain bandwidth product of TLV2460IDBVTG4 is around 1MHz.
Q: Is TLV2460IDBVTG4 suitable for low-power applications? A: Yes, TLV2460IDBVTG4 is designed for low-power applications, consuming only a few microamps of current.
Q: Can TLV2460IDBVTG4 be used in temperature-sensitive environments? A: Yes, TLV2460IDBVTG4 has a wide operating temperature range of -40°C to +125°C, making it suitable for temperature-sensitive applications.
Q: What is the input common-mode voltage range of TLV2460IDBVTG4? A: The input common-mode voltage range of TLV2460IDBVTG4 extends from the negative supply rail to within 1.5V of the positive supply rail.
Q: Does TLV2460IDBVTG4 have built-in protection features? A: Yes, TLV2460IDBVTG4 has built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: What are some typical applications of TLV2460IDBVTG4? A: TLV2460IDBVTG4 can be used in various applications such as sensor interfaces, battery-powered systems, portable devices, and low-power signal conditioning circuits.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.