Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
TLV171IDR
Details bekijken DataSheets

TLV171IDR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Single Supply, General Purpose
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: TLV171IDR is a low-power operational amplifier designed for general-purpose applications. It operates from a single supply voltage and provides rail-to-rail input and output capabilities.
  • Packaging/Quantity: TLV171IDR is available in a standard SOIC package with a quantity of 250 units per reel.

Specifications

  • Supply Voltage: 2.7V to 16V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Quiescent Current: 900µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV171IDR has a standard pin configuration as follows:

___________ V+ | | V- + | | - IN-| | OUT IN+| | - |___________|

Functional Features

  • Low-power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Single-supply operation simplifies circuit design.
  • General-purpose operational amplifier suitable for various applications.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life.
  • Rail-to-rail input/output enables accurate signal amplification.
  • Single-supply operation simplifies circuit design.
  • Wide operating temperature range allows for use in various environments.

Disadvantages

  • Limited gain bandwidth product may not be suitable for high-frequency applications.
  • Input offset voltage may introduce errors in precision applications.

Working Principles

The TLV171IDR is based on a differential amplifier configuration. It amplifies the difference between the input voltages and provides an amplified output signal. The rail-to-rail input/output capability ensures that the amplifier can accurately amplify signals even when they are close to the supply rails.

Detailed Application Field Plans

The TLV171IDR can be used in various applications, including:

  1. Sensor Signal Conditioning: Amplifying and conditioning signals from sensors such as temperature, pressure, or light sensors.
  2. Audio Amplification: Amplifying audio signals in portable devices, headphones, or audio systems.
  3. Battery-Powered Systems: Power-efficient amplification in battery-powered devices like portable instruments or wireless communication devices.
  4. Industrial Control Systems: Signal conditioning and amplification in industrial control systems for precise measurement and control.

Detailed and Complete Alternative Models

  1. TLV1701IDR: Similar to TLV171IDR but with lower quiescent current.
  2. TLV1721IDR: Dual operational amplifier with similar characteristics to TLV171IDR.
  3. TLV1731IDR: Operational amplifier with higher gain bandwidth product for high-frequency applications.

These alternative models provide options with different specifications to suit specific application requirements.

Word count: 346 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TLV171IDR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TLV171IDR in technical solutions:

  1. Q: What is TLV171IDR? A: TLV171IDR is a low-voltage operational amplifier (op-amp) that is commonly used in various electronic circuits.

  2. Q: What is the voltage range supported by TLV171IDR? A: TLV171IDR supports a wide voltage range from 2.7V to 16V, making it suitable for both low and high voltage applications.

  3. Q: What is the typical gain bandwidth product of TLV171IDR? A: The typical gain bandwidth product of TLV171IDR is 4 MHz, which indicates its ability to amplify signals accurately within this frequency range.

  4. Q: Can TLV171IDR be used in single-supply applications? A: Yes, TLV171IDR can be used in single-supply applications as it has rail-to-rail input and output capabilities, allowing it to operate with voltages close to the supply rails.

  5. Q: Is TLV171IDR suitable for precision applications? A: Yes, TLV171IDR is suitable for precision applications as it offers low offset voltage and low input bias current, ensuring accurate signal amplification.

  6. Q: What is the maximum output current TLV171IDR can provide? A: TLV171IDR can provide a maximum output current of 60 mA, making it capable of driving a variety of loads.

  7. Q: Can TLV171IDR operate in harsh environments? A: TLV171IDR has a wide operating temperature range of -40°C to 125°C, making it suitable for operation in harsh environments.

  8. Q: Does TLV171IDR have built-in protection features? A: Yes, TLV171IDR has built-in protection features such as thermal shutdown and short-circuit protection, ensuring its reliability and preventing damage.

  9. Q: Can TLV171IDR be used in audio applications? A: Yes, TLV171IDR can be used in audio applications as it offers low noise and distortion, making it suitable for amplifying audio signals.

  10. Q: What is the package type of TLV171IDR? A: TLV171IDR is available in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is commonly used in many electronic systems.

Please note that these answers are general and may vary depending on specific application requirements.