Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
TLC27M4CN
Details bekijken DataSheets

TLC27M4CN

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, precision, quad operational amplifier
  • Package: DIP-14 (Dual In-line Package with 14 pins)
  • Essence: The TLC27M4CN is a low-power, precision quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tubes or reels, with 25 pieces per tube/reel.

Specifications

  • Supply Voltage: ±2V to ±18V
  • Input Offset Voltage: 1mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Input Offset Current: 2nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.6V/µs (typical)
  • Input Common Mode Voltage Range: -0.3V to VCC+0.3V
  • Output Voltage Swing: -Vs+1.5V to VCC-1.5V

Pin Configuration

The TLC27M4CN has a DIP-14 package with the following pin configuration:

__ __ OUT1 | 1 14 | VCC+ OUT2 | 2 13 | IN4- OUT3 | 3 12 | IN4+ OUT4 | 4 11 | IN3- IN1- | 5 10 | IN3+ IN1+ | 6 9 | IN2- VCC- | 7 8 | IN2+ ¯¯ ¯¯

Functional Features

  • Low power consumption: The TLC27M4CN operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Precision: It offers high accuracy and stability in amplification, ensuring precise signal processing.
  • Quad operational amplifier: The IC contains four independent operational amplifiers in a single package, providing flexibility in circuit design.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - High precision ensures accurate signal amplification. - Quad package saves board space and reduces component count.

Disadvantages: - Limited gain bandwidth product may restrict its use in high-frequency applications. - Input common mode voltage range is not rail-to-rail, which may limit its suitability for certain applications.

Working Principles

The TLC27M4CN is based on the operational amplifier (op-amp) principle. It amplifies the difference between two input voltages and produces an output voltage proportional to this difference. The op-amp's internal circuitry consists of transistors, resistors, and capacitors that enable amplification and signal processing.

Application Field Plans

The TLC27M4CN finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Signal filtering and amplification in industrial control systems 4. Battery-powered instrumentation 5. Active filters and equalizers in audio systems

Alternative Models

Other alternative models with similar characteristics and functionality to the TLC27M4CN include: - LM324 - TL084 - OP07 - MCP6004

These alternatives can be considered based on specific application requirements and availability.

Word Count: 314 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TLC27M4CN in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TLC27M4CN in technical solutions:

  1. Question: What is the TLC27M4CN?
    Answer: The TLC27M4CN is a precision operational amplifier (op-amp) that is commonly used in various technical applications.

  2. Question: What is the voltage supply range for the TLC27M4CN?
    Answer: The TLC27M4CN operates on a voltage supply range of ±2V to ±18V.

  3. Question: What is the typical input offset voltage of the TLC27M4CN?
    Answer: The typical input offset voltage of the TLC27M4CN is 300µV.

  4. Question: Can the TLC27M4CN be used in low-power applications?
    Answer: Yes, the TLC27M4CN is designed for low-power operation, making it suitable for battery-powered devices.

  5. Question: What is the maximum output current of the TLC27M4CN?
    Answer: The TLC27M4CN can provide a maximum output current of 40mA.

  6. Question: Is the TLC27M4CN suitable for high-precision applications?
    Answer: Yes, the TLC27M4CN offers high precision with low input offset voltage and low input bias current, making it suitable for high-precision applications.

  7. Question: Can the TLC27M4CN operate in harsh environments?
    Answer: The TLC27M4CN has a wide operating temperature range of -40°C to +125°C, allowing it to function in harsh environments.

  8. Question: Does the TLC27M4CN have built-in protection features?
    Answer: Yes, the TLC27M4CN includes built-in protection features such as short-circuit protection and thermal shutdown.

  9. Question: Can the TLC27M4CN be used in audio applications?
    Answer: Yes, the TLC27M4CN can be used in audio applications due to its low noise and high gain bandwidth product.

  10. Question: What is the package type of the TLC27M4CN?
    Answer: The TLC27M4CN is available in a standard 14-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.

Please note that these answers are general and may vary depending on specific application requirements.