Zie specificaties voor productdetails.
TLC252CP
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics:
- Low power consumption
- Rail-to-rail input and output
- Wide supply voltage range
- High slew rate
- Package: DIP-8 (Dual In-Line Package with 8 pins)
- Essence: The TLC252CP is a low-power operational amplifier designed for general-purpose applications.
- Packaging/Quantity: Available in tubes or reels, with 50 units per tube/reel.
Specifications
- Supply Voltage Range: ±2 V to ±18 V
- Input Offset Voltage: 1 mV (maximum)
- Input Bias Current: 0.5 pA (typical)
- Slew Rate: 3.6 V/µs (typical)
- Gain Bandwidth Product: 2.2 MHz (typical)
- Output Current: 40 mA (typical)
Pin Configuration
The TLC252CP has the following pin configuration:
___________
VCC | 1 8 | VOUT
IN- | 2 7 | IN+
IN+ | 3 6 | NC
OUT | 4 5 | OFFSET N1
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low power consumption allows for extended battery life in portable devices.
- Rail-to-rail input and output capability enables operation at the full supply voltage range.
- Wide supply voltage range makes it suitable for various applications.
- High slew rate ensures fast response to input signals.
Advantages and Disadvantages
Advantages: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High slew rate
Disadvantages: - Limited gain bandwidth product compared to specialized amplifiers - Lower output current compared to some other operational amplifiers
Working Principles
The TLC252CP is based on a differential input stage followed by a push-pull output stage. It utilizes a combination of bipolar and CMOS technologies to achieve low power consumption and rail-to-rail operation. The internal circuitry provides high gain, low offset voltage, and low noise performance.
Application Field Plans
The TLC252CP is suitable for a wide range of applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Active filters - Signal buffering - Voltage-controlled oscillators
Alternative Models
Some alternative models that can be considered as replacements for the TLC252CP are: - LM358 - TL072 - OP07 - MCP6002
These alternatives offer similar functionality and characteristics, allowing for flexibility in design choices.
Word count: 238 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TLC252CP in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of TLC252CP in technical solutions:
Q: What is TLC252CP? A: TLC252CP is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.
Q: What is the voltage supply range for TLC252CP? A: The voltage supply range for TLC252CP is typically between 3V and 16V.
Q: What is the maximum output current of TLC252CP? A: The maximum output current of TLC252CP is typically around 20mA.
Q: Can TLC252CP be used as a voltage follower? A: Yes, TLC252CP can be used as a voltage follower by connecting the output pin to the inverting input pin.
Q: What is the input offset voltage of TLC252CP? A: The input offset voltage of TLC252CP is typically around 2mV.
Q: Is TLC252CP suitable for low-power applications? A: Yes, TLC252CP is designed for low-power consumption, making it suitable for battery-powered or energy-efficient devices.
Q: Can TLC252CP be used in audio applications? A: Yes, TLC252CP can be used in audio applications such as audio amplifiers, equalizers, or audio mixers.
Q: What is the typical gain bandwidth product of TLC252CP? A: The typical gain bandwidth product of TLC252CP is around 1MHz.
Q: Can TLC252CP operate in a wide temperature range? A: Yes, TLC252CP is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Q: Can TLC252CP be used in single-supply applications? A: Yes, TLC252CP can be used in single-supply applications by connecting the non-inverting input pin to a reference voltage.