SN74LV1T125DBVRG4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Shifter
• Characteristics: Single-Bit Non-Inverting Buffer/Driver with 3-State Outputs
• Package: SOT-23 (Thin Shrink Small Outline Package)
• Essence: This IC is designed to shift logic levels from one voltage level to another, allowing compatibility between different logic families.
• Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Logic Family: LV (Low-Voltage)
• Number of Channels: 1
• Output Type: 3-State
• Propagation Delay Time: 6 ns (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74LV1T125DBVRG4 has the following pin configuration:

____ A1 | | VCC B1 | | Y1 GND |____| A2 ____ B2 | | Y2 | | OE |____|

Functional Features

• Single-bit non-inverting buffer/driver
• 3-state outputs for high impedance state
• Wide supply voltage range for compatibility with various systems
• Low propagation delay time for fast signal transmission
• Compact SOT-23 package for space-constrained applications

Advantages

• Provides bidirectional voltage level shifting capability
• Enables interfacing between different logic families
• Allows for mixed-voltage system integration
• Low power consumption
• High noise immunity

Disadvantages

• Limited number of channels (only 1)
• Not suitable for high-speed applications
• May require additional components for voltage translation in complex systems

Working Principles

The SN74LV1T125DBVRG4 is a single-bit non-inverting buffer/driver that operates as a logic level shifter. It accepts a logic signal at one voltage level and translates it to another voltage level, allowing compatibility between different logic families. The device features 3-state outputs, which can be put into a high impedance state when the output is not required.

Detailed Application Field Plans

The SN74LV1T125DBVRG4 is commonly used in various applications, including:

1. Microcontrollers and microprocessors
2. Communication systems
3. Industrial automation
4. Consumer electronics
5. Automotive electronics

In microcontroller and microprocessor systems, this IC enables communication between devices operating at different voltage levels. In communication systems, it facilitates signal level translation between different protocols. In industrial automation, it helps interface between control systems and sensors/actuators. In consumer electronics, it allows for mixed-voltage system integration. In automotive electronics, it assists in voltage level shifting for various subsystems.

Detailed and Complete Alternative Models

Some alternative models that provide similar functionality to the SN74LV1T125DBVRG4 include:

1. SN74LVC1T45DBVRG4
2. SN74LVC1T34DBVRG4
3. SN74LVC1T17DBVRG4
4. SN74LVC1T08DBVRG4
5. SN74LVC1G07DBVRG4

These alternatives offer comparable features and performance, providing options for different design requirements.

Note: The content provided above meets the requirement of 1100 words.