Zie specificaties voor productdetails.
SN74CBT16244CDGVR
Product Overview
Category
SN74CBT16244CDGVR belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used as a bus switch or multiplexer/demultiplexer in electronic circuits.
Characteristics
- High-speed switching capability
- Low power consumption
- Wide operating voltage range
- Compact package size
- RoHS compliant
Package
SN74CBT16244CDGVR is available in a small form factor package, typically a VFBGA (Very Fine Pitch Ball Grid Array) package.
Essence
The essence of SN74CBT16244CDGVR lies in its ability to control the flow of data between multiple input/output lines, enabling efficient data routing and signal transmission.
Packaging/Quantity
SN74CBT16244CDGVR is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel/tube.
Specifications
- Number of Channels: 16
- Input Voltage Range: 0V to VCC
- Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage: 1.65V to 3.6V
- Maximum On-State Resistance: 5Ω
- Maximum Propagation Delay: 4.5ns
Detailed Pin Configuration
The pin configuration of SN74CBT16244CDGVR is as follows:
Pin 1: GND
Pin 2: A1
Pin 3: B1
Pin 4: OE#
Pin 5: Y1
...
Pin 48: VCC
Functional Features
- Bidirectional data flow
- Low input/output capacitance
- ESD protection on all pins
- Built-in voltage level translation
Advantages and Disadvantages
Advantages
- High-speed switching allows for efficient data transfer.
- Low power consumption helps in reducing overall energy usage.
- Wide operating voltage range enables compatibility with various systems.
- Compact package size saves valuable board space.
Disadvantages
- Limited number of channels may not be suitable for applications requiring a higher channel count.
- Relatively high on-state resistance may introduce signal degradation in certain scenarios.
Working Principles
SN74CBT16244CDGVR operates by selectively connecting or disconnecting the input/output lines based on the control signals provided. When the enable (OE#) signal is active, the IC allows bidirectional data flow between the selected channels. When the enable signal is inactive, the IC isolates the input and output lines, preventing any data transmission.
Detailed Application Field Plans
SN74CBT16244CDGVR finds applications in various fields, including but not limited to: - Data communication systems - Networking equipment - Test and measurement instruments - Industrial automation - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN74CBT16244CDGVR are: - SN74CBT3257CDBQR - SN74CBT16212ADGGR - SN74CBT16211ADGGR - SN74CBT16210ADGGR - SN74CBT16209ADGGR
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific design requirements.
Word Count: 511
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN74CBT16244CDGVR in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of SN74CBT16244CDGVR in technical solutions:
Q: What is SN74CBT16244CDGVR? A: SN74CBT16244CDGVR is a 16-bit bus switch with 3-state outputs, designed for multiplexing and demultiplexing digital signals.
Q: What is the voltage range supported by SN74CBT16244CDGVR? A: SN74CBT16244CDGVR supports a voltage range from 1.65V to 5.5V.
Q: How many channels does SN74CBT16244CDGVR have? A: SN74CBT16244CDGVR has 16 channels, allowing it to handle 16 different digital signals.
Q: Can SN74CBT16244CDGVR be used for bidirectional communication? A: Yes, SN74CBT16244CDGVR supports bidirectional communication, making it suitable for applications where data needs to be transmitted in both directions.
Q: What is the maximum data rate supported by SN74CBT16244CDGVR? A: SN74CBT16244CDGVR can support data rates up to 100 MHz, making it suitable for high-speed applications.
Q: Does SN74CBT16244CDGVR have built-in ESD protection? A: Yes, SN74CBT16244CDGVR has built-in ESD protection, ensuring reliable operation in environments with electrostatic discharge risks.
Q: Can SN74CBT16244CDGVR be cascaded to increase the number of channels? A: Yes, multiple SN74CBT16244CDGVR devices can be cascaded together to increase the number of channels as per the application requirements.
Q: What is the power supply voltage required for SN74CBT16244CDGVR? A: SN74CBT16244CDGVR requires a power supply voltage between 2V and 5.5V.
Q: Does SN74CBT16244CDGVR have an enable pin? A: Yes, SN74CBT16244CDGVR has an active-low enable pin (EN) that allows the user to control the operation of the device.
Q: Can SN74CBT16244CDGVR handle both digital and analog signals? A: No, SN74CBT16244CDGVR is specifically designed for digital signals and may not be suitable for handling analog signals.
Please note that these answers are general and may vary depending on the specific application and use case. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.