Zie specificaties voor productdetails.
OPA363AIDBVT
Product Overview
Category
The OPA363AIDBVT belongs to the category of operational amplifiers (op-amps).
Use
It is commonly used as a high-speed, low-power voltage feedback amplifier in various electronic circuits.
Characteristics
- High speed
- Low power consumption
- Voltage feedback architecture
Package
The OPA363AIDBVT is available in a small SOT-23 package, making it suitable for space-constrained applications.
Essence
This op-amp is essential for amplifying and processing analog signals in electronic systems.
Packaging/Quantity
The OPA363AIDBVT is typically sold in reels containing a specific quantity, such as 3000 units per reel.
Specifications
- Supply Voltage: ±2.5V to ±6V
- Bandwidth: 50MHz
- Slew Rate: 150V/µs
- Quiescent Current: 1.4mA
- Input Offset Voltage: 1mV
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The OPA363AIDBVT has a standard pin configuration with 5 pins: 1. OUT: Output 2. V+: Positive Power Supply 3. V-: Negative Power Supply 4. NC: Not Connected 5. IN-: Inverting Input 6. IN+: Non-Inverting Input
Functional Features
- High-speed signal amplification
- Low power consumption
- Wide operating temperature range
- Small form factor
Advantages
- Suitable for low-power applications
- High bandwidth for fast signal processing
- Small package size for space-constrained designs
Disadvantages
- Limited supply voltage range compared to some other op-amps
- May not be suitable for high-voltage applications
Working Principles
The OPA363AIDBVT operates based on the principles of voltage feedback amplification, where the difference between the non-inverting and inverting input voltages is amplified and provided at the output.
Detailed Application Field Plans
The OPA363AIDBVT is widely used in the following applications: - Portable instrumentation - Battery-powered devices - Sensor signal conditioning - Audio amplification
Detailed and Complete Alternative Models
Some alternative models to the OPA363AIDBVT include: - OPA355: Lower power consumption - OPA376: Higher slew rate - OPA340: Single-supply operation
In conclusion, the OPA363AIDBVT is a versatile operational amplifier with high-speed and low-power characteristics, making it suitable for a wide range of electronic applications.
[Word Count: 366]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van OPA363AIDBVT in technische oplossingen
What is the OPA363AIDBVT?
- The OPA363AIDBVT is a low-power, single-supply operational amplifier designed for applications requiring rail-to-rail input and output operation.
What is the typical supply voltage range for OPA363AIDBVT?
- The typical supply voltage range for OPA363AIDBVT is from 1.8V to 5.5V.
What are the typical applications of OPA363AIDBVT?
- Typical applications include battery-powered instrumentation, sensor interfaces, and portable medical devices.
What is the input offset voltage of OPA363AIDBVT?
- The input offset voltage is typically 150µV for OPA363AIDBVT.
What is the gain bandwidth product of OPA363AIDBVT?
- The gain bandwidth product is typically 10MHz for OPA363AIDBVT.
What is the quiescent current consumption of OPA363AIDBVT?
- The quiescent current consumption is typically 550µA for OPA363AIDBVT.
What is the temperature range for OPA363AIDBVT?
- The operating temperature range is typically from -40°C to 125°C for OPA363AIDBVT.
Can OPA363AIDBVT be used in single-supply applications?
- Yes, OPA363AIDBVT is designed for single-supply applications.
What is the output voltage swing of OPA363AIDBVT?
- The output voltage swing is typically within 10mV of the rails for OPA363AIDBVT.
Is OPA363AIDBVT available in a small package?
- Yes, OPA363AIDBVT is available in the SOT-23 package, making it suitable for space-constrained applications.