Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
OPA336UA
Details bekijken DataSheets

OPA336UA

Product Overview

Category: Operational Amplifier
Use: Signal amplification and conditioning
Characteristics: High precision, low noise, low power consumption
Package: SOIC-8
Essence: Operational amplifier with rail-to-rail input/output
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage: ±1.8V to ±5.5V
  • Input Offset Voltage: 150µV (maximum)
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Quiescent Current: 750µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OPA336UA operational amplifier has the following pin configuration:

  1. OUT: Output
  2. V-: Negative Power Supply
  3. IN-: Inverting Input
  4. IN+: Non-Inverting Input
  5. V+: Positive Power Supply
  6. NC: No Connection
  7. NC: No Connection
  8. GND: Ground

Functional Features

  • Rail-to-rail input and output voltage range
  • Low input offset voltage and bias current for high precision applications
  • Wide supply voltage range for flexibility in various systems
  • Low quiescent current for reduced power consumption
  • High gain bandwidth product and slew rate for fast signal processing

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise performance - Wide operating temperature range - Small package size for space-constrained designs

Disadvantages: - Limited output current capability - Not suitable for high-power applications

Working Principles

The OPA336UA is an operational amplifier designed to amplify and condition signals in various electronic systems. It operates on a wide supply voltage range, allowing it to be used in battery-powered devices as well as industrial applications. The rail-to-rail input/output capability ensures that the amplifier can handle signals close to the power supply rails without distortion.

The low input offset voltage and bias current contribute to high precision amplification, making the OPA336UA suitable for applications that require accurate signal processing. The low quiescent current helps reduce power consumption, making it ideal for portable and low-power devices.

Detailed Application Field Plans

The OPA336UA can be used in a wide range of applications, including but not limited to:

  1. Sensor signal conditioning
  2. Audio amplification
  3. Data acquisition systems
  4. Medical instrumentation
  5. Battery-powered devices
  6. Industrial control systems

Detailed and Complete Alternative Models

  1. OPA333: Single-channel version of OPA336UA
  2. OPA335: Triple-channel version of OPA336UA
  3. MCP6002: Low-cost alternative with similar specifications
  4. LT1677: High-precision alternative with lower noise performance

These alternative models provide options based on specific requirements and budget constraints.

In conclusion, the OPA336UA is a versatile operational amplifier that offers high precision, low noise, and low power consumption. Its rail-to-rail input/output capability and wide supply voltage range make it suitable for a variety of applications. However, its limited output current capability restricts its use in high-power scenarios. Engineers can consider alternative models based on their specific needs.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van OPA336UA in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of OPA336UA in technical solutions:

  1. Q: What is OPA336UA? A: OPA336UA is a low-power, single-supply operational amplifier (op-amp) that is commonly used in various electronic circuits.

  2. Q: What is the supply voltage range for OPA336UA? A: The supply voltage range for OPA336UA is typically between 2.7V and 5.5V.

  3. Q: What is the input voltage range of OPA336UA? A: The input voltage range of OPA336UA extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Q: What is the typical gain bandwidth product (GBW) of OPA336UA? A: The typical gain bandwidth product of OPA336UA is around 10 MHz.

  5. Q: Can OPA336UA operate with a single power supply? A: Yes, OPA336UA is designed to operate with a single power supply, making it suitable for battery-powered applications.

  6. Q: What is the input bias current of OPA336UA? A: The input bias current of OPA336UA is typically very low, around 1 pA.

  7. Q: Is OPA336UA suitable for precision applications? A: Yes, OPA336UA is often used in precision applications due to its low offset voltage and low drift over temperature.

  8. Q: Can OPA336UA drive capacitive loads? A: Yes, OPA336UA has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.

  9. Q: What is the typical quiescent current of OPA336UA? A: The typical quiescent current of OPA336UA is very low, typically around 20 µA.

  10. Q: What are some common applications for OPA336UA? A: OPA336UA is commonly used in applications such as sensor interfaces, battery-powered systems, signal conditioning, and low-power audio amplification.

Please note that the specific values mentioned above may vary depending on the manufacturer's datasheet and operating conditions.