Zie specificaties voor productdetails.
OPA2380AIDGKT
Product Overview
Category: Operational Amplifier (Op-Amp)
Use: The OPA2380AIDGKT is a high-speed, low-noise operational amplifier designed for precision applications. It offers excellent performance in terms of speed, accuracy, and noise reduction.
Characteristics: - High-speed operation - Low input offset voltage - Low noise - Wide supply voltage range - Rail-to-rail input and output capability
Package: The OPA2380AIDGKT comes in a small 8-pin VSSOP package, which allows for easy integration into various circuit designs.
Essence: This op-amp is specifically designed to provide precise amplification and signal conditioning in applications that require high-speed and low-noise performance.
Packaging/Quantity: The OPA2380AIDGKT is typically available in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply Voltage Range: ±2.5V to ±18V
- Input Offset Voltage: 0.5mV (maximum)
- Gain Bandwidth Product: 100MHz
- Slew Rate: 50V/µs
- Input Noise Voltage: 4.5nV/√Hz
- Input Bias Current: 1pA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The OPA2380AIDGKT has the following pin configuration:
___________
OUT | 1 8 | V+
IN- | 2 7 | IN+
IN+ | 3 6 | V-
V- | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- High-speed amplification: The OPA2380AIDGKT offers a gain bandwidth product of 100MHz, making it suitable for applications that require fast signal processing.
- Low noise: With an input noise voltage of 4.5nV/√Hz, this op-amp ensures minimal noise interference in sensitive circuits.
- Rail-to-rail input and output: The OPA2380AIDGKT supports input and output signals that can swing close to the supply rails, maximizing dynamic range and signal fidelity.
- Low power consumption: This op-amp is designed to operate efficiently with low power consumption, making it suitable for battery-powered applications.
Advantages and Disadvantages
Advantages: - High-speed operation enables accurate signal processing in time-critical applications. - Low noise performance ensures high signal integrity. - Rail-to-rail input and output capability maximizes dynamic range. - Low power consumption extends battery life in portable devices.
Disadvantages: - Limited availability in certain regions or distributors. - Higher cost compared to standard operational amplifiers.
Working Principles
The OPA2380AIDGKT operates based on the principles of differential amplification. It takes the difference between the voltages at its non-inverting and inverting inputs and amplifies it by a fixed gain. The amplified output is then fed back to the inverting input to maintain stability and linearity.
Detailed Application Field Plans
The OPA2380AIDGKT finds application in various fields, including but not limited to: 1. Audio amplification and signal conditioning in professional audio equipment. 2. Precision measurement instruments requiring high-speed and low-noise performance. 3. Data acquisition systems where accurate signal processing is crucial. 4. Communication systems for amplifying and conditioning signals. 5. Industrial control systems that demand high-speed and low-noise amplification.
Detailed and Complete Alternative Models
- OPA2180AIDGKT: Similar to the OPA2380AIDGKT, but with a lower gain bandwidth product of 20MHz.
- OPA2277AIDR: A dual operational amplifier with similar characteristics, suitable for applications requiring multiple channels.
- LT6230IS6#TRMPBF: A high-speed, low-noise operational amplifier with a different pin configuration, suitable for space-constrained designs.
These alternative models offer similar performance characteristics and can be considered as substitutes based on specific application requirements.
Word count: 536 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van OPA2380AIDGKT in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of OPA2380AIDGKT in technical solutions:
Q: What is the OPA2380AIDGKT? A: The OPA2380AIDGKT is a high-speed operational amplifier (op-amp) designed for various applications, including signal conditioning, data acquisition, and communication systems.
Q: What is the supply voltage range for the OPA2380AIDGKT? A: The OPA2380AIDGKT operates from a single supply voltage ranging from 4.5V to 36V.
Q: What is the bandwidth of the OPA2380AIDGKT? A: The OPA2380AIDGKT has a bandwidth of 200 MHz, making it suitable for high-frequency applications.
Q: Can the OPA2380AIDGKT be used in low-power applications? A: No, the OPA2380AIDGKT is not optimized for low-power applications as it consumes relatively higher power compared to low-power op-amps.
Q: What is the input voltage noise of the OPA2380AIDGKT? A: The input voltage noise of the OPA2380AIDGKT is typically 6.5 nV/√Hz, which ensures accurate signal amplification.
Q: Is the OPA2380AIDGKT suitable for precision applications? A: Yes, the OPA2380AIDGKT offers excellent DC accuracy with a maximum offset voltage of 500 µV and a maximum offset drift of 5 µV/°C.
Q: Can the OPA2380AIDGKT drive capacitive loads? A: Yes, the OPA2380AIDGKT has a high output current capability of ±100 mA, allowing it to drive capacitive loads without significant degradation in performance.
Q: What is the temperature range for the OPA2380AIDGKT? A: The OPA2380AIDGKT can operate over a wide temperature range from -40°C to +125°C.
Q: Does the OPA2380AIDGKT have built-in protection features? A: Yes, the OPA2380AIDGKT includes built-in protection against short-circuits and thermal shutdown to ensure safe operation.
Q: Can the OPA2380AIDGKT be used in audio applications? A: While the OPA2380AIDGKT is primarily designed for high-speed applications, it can also be used in certain audio applications that require high bandwidth and precision amplification.
Please note that these answers are general and may vary depending on specific application requirements.