Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
OPA2347EA/3K

OPA2347EA/3K

Product Overview

Category

OPA2347EA/3K belongs to the category of operational amplifiers (op-amps).

Use

OPA2347EA/3K is commonly used in electronic circuits for amplification and signal conditioning purposes.

Characteristics

  • High gain: OPA2347EA/3K offers a high voltage gain, making it suitable for applications requiring precise amplification.
  • Low noise: The op-amp has low input and output noise, ensuring accurate signal processing.
  • Wide bandwidth: OPA2347EA/3K operates over a wide frequency range, enabling it to handle various signals.
  • Low power consumption: This op-amp consumes minimal power, making it energy-efficient.
  • Rail-to-rail input/output: It supports input and output signals that span the entire supply voltage range.
  • Small package size: OPA2347EA/3K is available in a compact package, saving space in circuit designs.

Package and Quantity

OPA2347EA/3K is typically packaged in a small outline integrated circuit (SOIC) package. It is commonly sold in reels or tubes containing multiple units.

Specifications

  • Supply voltage: ±2.5V to ±18V
  • Input offset voltage: 0.5mV (maximum)
  • Input bias current: 1nA (maximum)
  • Gain bandwidth product: 10MHz
  • Slew rate: 5V/µs
  • Operating temperature range: -40°C to +125°C

Pin Configuration

The OPA2347EA/3K op-amp has the following pin configuration:

___________ V+ | 1 8 | V- IN-| 2 7 | OUT IN+| 3 6 | NC NC | 4 5 | NC ¯¯¯¯¯¯¯¯¯¯¯

Functional Features

  • High precision amplification: OPA2347EA/3K provides accurate amplification of input signals.
  • Low distortion: It ensures minimal distortion in the amplified output signal.
  • Stable operation: The op-amp maintains stability even under varying load conditions.
  • Unity-gain stable: It remains stable when configured for unity gain (feedback resistor not required).
  • EMI filtering: OPA2347EA/3K incorporates internal electromagnetic interference (EMI) filters, reducing noise interference.

Advantages and Disadvantages

Advantages

  • High gain and low noise enable precise signal amplification.
  • Wide bandwidth allows handling of various frequency components.
  • Rail-to-rail input/output capability enhances signal range compatibility.
  • Low power consumption contributes to energy efficiency.
  • Small package size saves space in circuit designs.

Disadvantages

  • Limited supply voltage range compared to some other op-amps.
  • Slightly higher input offset voltage may affect applications requiring extreme precision.

Working Principles

OPA2347EA/3K operates based on the principles of differential amplification. It amplifies the voltage difference between its two input terminals, providing an amplified output signal that is a linear function of the input voltage.

Detailed Application Field Plans

OPA2347EA/3K finds application in various fields, including: 1. Audio amplification: It can be used in audio systems to amplify weak audio signals. 2. Sensor signal conditioning: OPA2347EA/3K helps in amplifying and conditioning signals from sensors such as temperature, pressure, or light sensors. 3. Instrumentation: It is suitable for precision measurement instruments where accurate signal amplification is crucial. 4. Active filters: OPA2347EA/3K can be utilized in active filter circuits to shape and process specific frequency components.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to OPA2347EA/3K are: - LM324 - TL071 - AD822

These op-amps offer similar functionalities and can be used as substitutes depending on specific requirements.

In conclusion, OPA2347EA/3K is a high-performance operational amplifier with characteristics such as high gain, low noise, and wide bandwidth. It finds applications in various fields, including audio amplification, sensor signal conditioning, instrumentation, and active filters. While it has advantages like rail-to-rail input/output and low power consumption, it also has limitations in terms of supply voltage range and input offset voltage. Alternative models like LM324, TL071, and AD822 can be considered based on specific needs.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van OPA2347EA/3K in technische oplossingen

  1. What is the typical supply voltage range for OPA2347EA/3K?
    - The typical supply voltage range for OPA2347EA/3K is 2.7V to 5.5V.

  2. What is the input offset voltage of OPA2347EA/3K?
    - The input offset voltage of OPA2347EA/3K is typically 150µV.

  3. Can OPA2347EA/3K be used in single-supply applications?
    - Yes, OPA2347EA/3K can be used in single-supply applications.

  4. What is the bandwidth of OPA2347EA/3K?
    - The bandwidth of OPA2347EA/3K is typically 10MHz.

  5. Is OPA2347EA/3K suitable for precision instrumentation applications?
    - Yes, OPA2347EA/3K is suitable for precision instrumentation applications due to its low offset voltage and low noise.

  6. What is the common-mode rejection ratio (CMRR) of OPA2347EA/3K?
    - The CMRR of OPA2347EA/3K is typically 100dB.

  7. Can OPA2347EA/3K be used in battery-powered devices?
    - Yes, OPA2347EA/3K can be used in battery-powered devices due to its low supply voltage range.

  8. What is the input bias current of OPA2347EA/3K?
    - The input bias current of OPA2347EA/3K is typically 1pA.

  9. Does OPA2347EA/3K have thermal shutdown protection?
    - No, OPA2347EA/3K does not have thermal shutdown protection.

  10. Is OPA2347EA/3K available in a small package for space-constrained applications?
    - Yes, OPA2347EA/3K is available in small packages such as SC70 and SOT23 for space-constrained applications.