Zie specificaties voor productdetails.
OPA171AIDR
Product Overview
The OPA171AIDR belongs to the category of operational amplifiers (op-amps) and is widely used in various electronic applications. Known for its high precision, low noise, and wide bandwidth, this op-amp is packaged in a small outline package (SOIC) and is available in different quantities per package.
Basic Information
- Category: Operational Amplifier
- Use: Signal conditioning, filtering, amplification
- Characteristics: High precision, low noise, wide bandwidth
- Package: Small Outline Package (SOIC)
- Packaging/Quantity: Various packaging options available
Specifications
- Supply Voltage: ±1.35 V to ±18 V
- Input Offset Voltage: 150 µV (max)
- Gain Bandwidth Product: 10 MHz
- Slew Rate: 7 V/µs
- Operating Temperature Range: -40°C to 125°C
- Quiescent Current: 725 µA (max)
Detailed Pin Configuration
The OPA171AIDR has a standard pin configuration with 8 pins, including non-inverting input (pin 3), inverting input (pin 2), output (pin 6), and power supply pins.
+Vs (1) | (8) -Vs
Vin+ (2) | (7) NC
Vin- (3) | (6) Vout
NC (4) | (5) NC
Functional Features
- High precision and accuracy
- Low noise and distortion
- Wide operating voltage range
- Rail-to-rail output swing capability
- Low quiescent current
Advantages and Disadvantages
Advantages
- Excellent precision and linearity
- Low noise performance
- Suitable for low-power applications
- Wide operating temperature range
Disadvantages
- Limited output current capability
- Higher cost compared to general-purpose op-amps
Working Principles
The OPA171AIDR operates based on the principles of differential amplification and feedback control. It amplifies the difference between the two input voltages while maintaining high precision and low noise characteristics.
Detailed Application Field Plans
The OPA171AIDR finds extensive use in precision instrumentation, sensor signal conditioning, data acquisition systems, and audio processing applications. Its high precision and low noise make it suitable for applications requiring accurate signal amplification and filtering.
Detailed and Complete Alternative Models
- OPA170
- OPA172
- OPA177
- OPA189
In conclusion, the OPA171AIDR is a high-precision operational amplifier with wide application in various electronic systems, offering exceptional performance in terms of accuracy, noise, and bandwidth.
[Word Count: 345]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van OPA171AIDR in technische oplossingen
What is the OPA171AIDR?
- The OPA171AIDR is a precision operational amplifier with low offset voltage and low noise, suitable for a wide range of precision applications.
What is the typical supply voltage range for OPA171AIDR?
- The OPA171AIDR typically operates within a supply voltage range of 2.7V to 36V.
What are the key features of OPA171AIDR?
- The key features of OPA171AIDR include low offset voltage, low noise, high common-mode rejection ratio (CMRR), and low input bias current.
In what applications can OPA171AIDR be used?
- OPA171AIDR can be used in precision instrumentation, sensor signal conditioning, data acquisition systems, and other precision analog applications.
What is the input offset voltage of OPA171AIDR?
- The input offset voltage of OPA171AIDR is typically very low, around 150µV.
What is the bandwidth of OPA171AIDR?
- The bandwidth of OPA171AIDR is typically around 10MHz.
What is the temperature range for OPA171AIDR?
- OPA171AIDR is designed to operate over a wide temperature range, typically from -40°C to 125°C.
Does OPA171AIDR require external compensation?
- No, OPA171AIDR is internally compensated and does not require external compensation components.
Can OPA171AIDR be used in single-supply applications?
- Yes, OPA171AIDR can be used in both single-supply and split-supply applications.
What are the recommended application circuits for OPA171AIDR?
- Recommended application circuits for OPA171AIDR include inverting and non-inverting amplifiers, active filters, and precision integrators.