MSP430F4616IPZ

Product Overview

Use

It is primarily used for embedded systems and applications that require low power consumption and high performance.

Characteristics

Low power consumption
High performance
Integrated peripherals
Wide operating voltage range

Package

The MSP430F4616IPZ comes in a 100-pin LQFP (Low Profile Quad Flat Package) package.

Essence

The essence of the MSP430F4616IPZ lies in its ability to provide efficient and reliable control for various embedded systems.

Packaging/Quantity

The MSP430F4616IPZ is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

Microcontroller core: MSP430
CPU speed: Up to 25 MHz
Flash memory: 120 KB
RAM: 10 KB
Operating voltage range: 1.8V to 3.6V
Number of I/O pins: 80
ADC channels: 16
UART modules: 2
SPI modules: 2
I2C modules: 1

Detailed Pin Configuration

The MSP430F4616IPZ has a total of 100 pins, each serving a specific purpose. The pin configuration is as follows:

Pins 1-4: VCC (Power supply)
Pins 5-8: GND (Ground)
Pins 9-12: XT2IN/ACLK (External crystal oscillator input / Auxiliary clock input)
Pins 13-16: XT2OUT (External crystal oscillator output)
Pins 17-20: TEST/SBWTCK (Test mode select / Spy-Bi-Wire Test Clock)
Pins 21-24: TDI (Test Data Input)
Pins 25-28: TDO (Test Data Output)
Pins 29-32: TMS/SBWTDIO (Test mode select / Spy-Bi-Wire Test Data I/O)
Pins 33-36: RST/NMI (Reset / Non-Maskable Interrupt)
Pins 37-40: P2.0/P1.7 (General-purpose I/O)
Pins 41-44: P2.1/P1.6 (General-purpose I/O)
Pins 45-48: P2.2/P1.5 (General-purpose I/O)
Pins 49-52: P2.3/P1.4 (General-purpose I/O)
Pins 53-56: P2.4/P1.3 (General-purpose I/O)
Pins 57-60: P2.5/P1.2 (General-purpose I/O)
Pins 61-64: P2.6/P1.1 (General-purpose I/O)
Pins 65-68: P2.7/P1.0 (General-purpose I/O)
Pins 69-72: P3.0/UCB0STE (General-purpose I/O / SPI Slave Transmit Enable)
Pins 73-76: P3.1/UCB0CLK (General-purpose I/O / SPI Clock)
Pins 77-80: P3.2/UCB0SIMO (General-purpose I/O / SPI Master Out, Slave In)

(Note: The pin configuration continues beyond this point but is not included here for brevity.)

Functional Features

The MSP430F4616IPZ offers several functional features that make it a versatile microcontroller for various applications:

Low power consumption: The MSP430F4616IPZ is designed to operate efficiently in low power modes, making it suitable for battery-powered devices.
Integrated peripherals: It includes a wide range of integrated peripherals such as ADC, UART, SPI, and I2C modules, enabling seamless communication with external devices.
High performance: With a CPU speed of up to 25 MHz and ample memory resources, the MSP430F4616IPZ can handle complex tasks efficiently.
Wide operating voltage range: The microcontroller can operate within a voltage range of 1.8V to 3.6V, providing flexibility in different power supply scenarios.

Advantages and Disadvantages

Advantages

Low power consumption extends battery life in portable applications.
Integrated peripherals reduce the need for additional components.
High-performance capabilities enable efficient execution of complex tasks.
Wide operating voltage range allows for flexibility in power supply options.

Disadvantages

Limited availability of alternative models with similar specifications.
Higher cost compared to some other microcontrollers in the market.

Working Principles

The MSP430F4616IPZ operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MSP430F4616IPZ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MSP430F4616IPZ in technical solutions:

Q: What is MSP430F4616IPZ? A: MSP430F4616IPZ is a microcontroller from Texas Instruments' MSP430 family, designed for low-power applications.
Q: What are the key features of MSP430F4616IPZ? A: Some key features include a 16-bit RISC CPU, up to 120KB flash memory, 10KB RAM, multiple communication interfaces, and low power consumption.
Q: What are some typical applications of MSP430F4616IPZ? A: MSP430F4616IPZ is commonly used in applications such as industrial control systems, home automation, medical devices, and portable instruments.
Q: How can I program MSP430F4616IPZ? A: MSP430F4616IPZ can be programmed using various development tools, including TI's Code Composer Studio (CCS) IDE or Energia, an open-source Arduino-like platform.
Q: What is the power consumption of MSP430F4616IPZ? A: The power consumption of MSP430F4616IPZ depends on the operating mode and clock frequency. In low-power modes, it can consume as little as a few microamps.
Q: Can MSP430F4616IPZ communicate with other devices? A: Yes, MSP430F4616IPZ supports various communication interfaces like UART, SPI, I2C, and USB, allowing it to communicate with other devices or peripherals.
Q: Does MSP430F4616IPZ have analog-to-digital converters (ADC)? A: Yes, MSP430F4616IPZ has a built-in 12-bit ADC, which can be used to measure analog signals from sensors or other external devices.
Q: Can I use MSP430F4616IPZ for battery-powered applications? A: Yes, MSP430F4616IPZ is well-suited for battery-powered applications due to its low power consumption and various low-power modes.
Q: Are there any development boards available for MSP430F4616IPZ? A: Yes, Texas Instruments offers various development boards like the MSP-EXP430F4618 experimenter board, which can be used for prototyping and evaluation.
Q: Where can I find more resources and support for MSP430F4616IPZ? A: You can find datasheets, application notes, and other resources on Texas Instruments' website. Additionally, TI's E2E community and forums are great places to seek support and connect with other users.

Please note that these answers are general and may vary depending on specific requirements and use cases.