LMV722ID

Product Overview

Category: Operational Amplifier
Use: Signal amplification and conditioning
Characteristics: Low power consumption, rail-to-rail output, low input offset voltage
Package: SOIC-8
Essence: High-performance operational amplifier
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

Supply Voltage: 2.7V to 5.5V
Input Offset Voltage: 1.5mV
Gain Bandwidth Product: 10MHz
Slew Rate: 3V/µs
Quiescent Current: 600µA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

OUT1
IN-
IN+
V-
NC
V+
OUT2
GND

Functional Features

Rail-to-Rail Output
Low Input Offset Voltage
Low Power Consumption
Wide Supply Voltage Range
Unity-Gain Stable

Advantages and Disadvantages

Advantages: - Suitable for low-power applications - Can operate with a wide range of supply voltages - Provides accurate amplification of signals

Disadvantages: - Limited output current capability - May exhibit higher noise compared to some alternatives

Working Principles

The LMV722ID is designed to amplify and condition small electrical signals with high accuracy and low power consumption. It utilizes a differential input stage and a push-pull output stage to achieve rail-to-rail operation.

Detailed Application Field Plans

The LMV722ID is commonly used in portable instrumentation, battery-powered systems, sensor signal conditioning, and audio amplification applications. Its low power consumption and rail-to-rail output make it suitable for various battery-operated devices.

Detailed and Complete Alternative Models

LMV722MM/NOPB: Similar specifications, different package (VSSOP-8)
LMV722IDGKR: Enhanced ESD protection, same specifications, different package (MSOP-8)

Note: The above information is subject to change. Always refer to the latest datasheet for accurate details.

Word Count: 305

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LMV722ID in technische oplossingen

Sure, here are 10 common questions and answers related to the application of LMV722ID:

What is LMV722ID?
- LMV722ID is a dual operational amplifier with rail-to-rail input and output capabilities, designed for low-voltage applications.
What is the typical supply voltage range for LMV722ID?
- The typical supply voltage range for LMV722ID is from 2.7V to 5.5V.
What are the key features of LMV722ID?
- Some key features of LMV722ID include low input offset voltage, low noise, low quiescent current, and rail-to-rail input and output.
What are the typical applications of LMV722ID?
- LMV722ID is commonly used in battery-powered systems, portable instrumentation, sensor interfaces, and audio signal processing.
What is the input offset voltage of LMV722ID?
- The input offset voltage of LMV722ID is typically around 1mV.
Can LMV722ID operate at higher temperatures?
- Yes, LMV722ID can operate at temperatures up to 125°C, making it suitable for industrial and automotive applications.
Does LMV722ID have ESD protection?
- Yes, LMV722ID is designed with built-in ESD protection, providing robustness against electrostatic discharge events.
What is the unity-gain bandwidth of LMV722ID?
- The unity-gain bandwidth of LMV722ID is typically around 1MHz.
Is LMV722ID available in a small package?
- Yes, LMV722ID is available in small packages such as SOT-23 and SOIC, making it suitable for space-constrained applications.
Can LMV722ID be used in single-supply applications?
- Yes, LMV722ID is designed to operate in single-supply applications, making it versatile for various circuit designs.

I hope these questions and answers provide helpful information about the application of LMV722ID in technical solutions. If you have any more specific questions, feel free to ask!