Zie specificaties voor productdetails.
LMV358AIDGKT
Product Overview
Category: Integrated Circuit (IC)
Use: Operational Amplifier
Characteristics: - Low voltage, low power consumption - Rail-to-rail input and output - Wide bandwidth - High slew rate - Low input offset voltage - Small package size
Package: VSSOP-8
Essence: The LMV358AIDGKT is a dual operational amplifier designed for low voltage applications. It offers high performance with low power consumption.
Packaging/Quantity: The LMV358AIDGKT is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 5.5V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±10nA (maximum)
- Gain Bandwidth Product: 1MHz (typical)
- Slew Rate: 0.6V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The LMV358AIDGKT has a VSSOP-8 package with the following pin configuration:
___________
OUT1 | 1 8 | VCC
IN-1 | 2 7 | OUT2
IN+1 | 3 6 | IN-2
VSS | 4 5 | IN+2
‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low voltage operation allows for use in battery-powered devices.
- Rail-to-rail input and output capability enables full utilization of the supply voltage range.
- Wide bandwidth ensures accurate signal amplification across a range of frequencies.
- High slew rate enables fast response to input signal changes.
- Low input offset voltage minimizes errors in amplification.
- Small package size saves board space and allows for compact designs.
Advantages and Disadvantages
Advantages: - Suitable for low voltage applications - Versatile rail-to-rail operation - Wide bandwidth for accurate signal amplification - Low power consumption - Compact package size
Disadvantages: - Limited supply voltage range (2.7V to 5.5V) - Relatively low gain bandwidth product compared to some other operational amplifiers
Working Principles
The LMV358AIDGKT is an operational amplifier that amplifies the difference between its two input voltages. It operates on a low supply voltage, making it suitable for battery-powered devices. The rail-to-rail input and output capability allows the amplifier to accept and deliver signals close to the supply voltage limits. This ensures maximum utilization of the available voltage range.
The amplifier's wide bandwidth enables accurate amplification of signals across a range of frequencies. Its high slew rate allows for fast response to changes in the input signal. The low input offset voltage minimizes errors in amplification, resulting in more precise output.
Detailed Application Field Plans
The LMV358AIDGKT is commonly used in various applications, including: 1. Portable audio devices 2. Battery-powered instrumentation 3. Sensor signal conditioning 4. Active filters 5. Signal amplification in low voltage systems
Detailed and Complete Alternative Models
Some alternative models to the LMV358AIDGKT include: 1. LM358N: DIP-8 package, similar specifications 2. TLV2462ID: SOIC-8 package, higher gain bandwidth product 3. MCP6002-I/P: DIP-8 package, lower power consumption
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
Word count: 409 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LMV358AIDGKT in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of LMV358AIDGKT in technical solutions:
Q: What is LMV358AIDGKT? A: LMV358AIDGKT is a dual operational amplifier (op-amp) that is commonly used in various electronic circuits.
Q: What are the key features of LMV358AIDGKT? A: Some key features of LMV358AIDGKT include low voltage operation, low input bias current, rail-to-rail output swing, and low power consumption.
Q: What is the typical supply voltage range for LMV358AIDGKT? A: The typical supply voltage range for LMV358AIDGKT is between 2.7V and 5.5V.
Q: Can LMV358AIDGKT be used in single-supply applications? A: Yes, LMV358AIDGKT can be used in both single-supply and dual-supply applications.
Q: What is the maximum output current of LMV358AIDGKT? A: The maximum output current of LMV358AIDGKT is typically around 20mA.
Q: Is LMV358AIDGKT suitable for low-power applications? A: Yes, LMV358AIDGKT is designed for low-power applications and has a low quiescent current.
Q: Can LMV358AIDGKT operate at high temperatures? A: Yes, LMV358AIDGKT has a wide temperature range and can operate reliably at high temperatures.
Q: What are some common applications of LMV358AIDGKT? A: LMV358AIDGKT is commonly used in audio amplifiers, sensor interfaces, signal conditioning circuits, and low-power instrumentation.
Q: Does LMV358AIDGKT have built-in protection features? A: Yes, LMV358AIDGKT has built-in protection features such as short-circuit protection and thermal shutdown.
Q: Can LMV358AIDGKT be used in battery-powered devices? A: Yes, LMV358AIDGKT's low power consumption and wide supply voltage range make it suitable for battery-powered devices.
Please note that these answers are general and may vary depending on the specific application and requirements.