Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
LMP7718MM/NOPB
Details bekijken DataSheets

LMP7718MM/NOPB

Product Overview

Category

The LMP7718MM/NOPB belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used in precision signal conditioning and amplification applications.

Characteristics

  • High precision
  • Low noise
  • Low offset voltage
  • Wide bandwidth

Package

The LMP7718MM/NOPB is available in a miniature 8-pin VSSOP package.

Essence

This op-amp is essential for applications requiring high precision and low noise amplification.

Packaging/Quantity

The LMP7718MM/NOPB is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±2.25V to ±18V
  • Input Offset Voltage: 25μV (max)
  • Gain Bandwidth Product: 10MHz
  • Input Bias Current: 1pA (max)

Detailed Pin Configuration

The pin configuration of the LMP7718MM/NOPB is as follows: 1. OUT- 2. IN- 3. V- 4. V+ 5. NC 6. VCC+ 7. IN+ 8. OUT+

Functional Features

  • Rail-to-Rail Output
  • Low Input Bias Current
  • Unity-Gain Stable
  • Overvoltage Protection

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Low noise
  • Wide supply voltage range

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The LMP7718MM/NOPB operates based on the principles of differential input amplification and provides high precision output that is suitable for a wide range of applications.

Detailed Application Field Plans

The LMP7718MM/NOPB is well-suited for the following applications: - Sensor signal conditioning - Instrumentation amplifiers - Data acquisition systems - Precision filters

Detailed and Complete Alternative Models

Some alternative models to the LMP7718MM/NOPB include: - AD8628 - LT1677 - OPA333

In conclusion, the LMP7718MM/NOPB is a high-precision operational amplifier with low noise characteristics, making it ideal for various precision signal conditioning and amplification applications.

[Word Count: 294]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LMP7718MM/NOPB in technische oplossingen

  1. What is the typical input voltage range for LMP7718MM/NOPB?
    - The typical input voltage range for LMP7718MM/NOPB is ±15V.

  2. What is the maximum output current of LMP7718MM/NOPB?
    - The maximum output current of LMP7718MM/NOPB is ±50mA.

  3. Can LMP7718MM/NOPB be used in single-supply applications?
    - Yes, LMP7718MM/NOPB can be used in single-supply applications with proper biasing.

  4. What is the bandwidth of LMP7718MM/NOPB?
    - The bandwidth of LMP7718MM/NOPB is 3.5MHz.

  5. Is LMP7718MM/NOPB suitable for precision instrumentation applications?
    - Yes, LMP7718MM/NOPB is suitable for precision instrumentation applications due to its low offset voltage and low noise.

  6. Does LMP7718MM/NOPB have built-in protection features?
    - Yes, LMP7718MM/NOPB has built-in overvoltage and reverse-voltage protection.

  7. Can LMP7718MM/NOPB operate in high-temperature environments?
    - Yes, LMP7718MM/NOPB can operate in high-temperature environments up to 125°C.

  8. What is the supply voltage range for LMP7718MM/NOPB?
    - The supply voltage range for LMP7718MM/NOPB is 4.5V to 36V.

  9. Is LMP7718MM/NOPB suitable for battery-powered applications?
    - Yes, LMP7718MM/NOPB is suitable for battery-powered applications due to its low quiescent current.

  10. Can LMP7718MM/NOPB be used in active filter designs?
    - Yes, LMP7718MM/NOPB can be used in active filter designs due to its high slew rate and wide bandwidth.