Zie specificaties voor productdetails.
LM6171BIM/NOPB
Product Overview
Category
The LM6171BIM/NOPB belongs to the category of operational amplifiers (op-amps).
Use
It is commonly used as a high-speed voltage feedback amplifier in various electronic circuits.
Characteristics
- High speed: The LM6171BIM/NOPB offers a high slew rate and bandwidth, making it suitable for high-frequency applications.
- Low distortion: It provides low total harmonic distortion (THD) and excellent linearity.
- Wide supply voltage range: This op-amp can operate over a wide range of supply voltages, enhancing its versatility in different circuit designs.
Package
The LM6171BIM/NOPB is available in an 8-pin SOIC package.
Essence
This op-amp is essential for achieving high-speed and accurate signal processing in electronic systems.
Packaging/Quantity
It is typically sold in reels containing a specific quantity, such as 2500 units per reel.
Specifications
- Supply Voltage Range: ±2.5V to ±15V
- Bandwidth: 100 MHz
- Slew Rate: 410 V/μs
- Input Bias Current: 10 nA
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The LM6171BIM/NOPB features the following pin configuration: 1. OUT: Output 2. IN-: Inverting Input 3. IN+: Non-Inverting Input 4. V-: Negative Power Supply 5. NC: Not Connected 6. V+: Positive Power Supply 7. V-: Negative Power Supply 8. VCC+: Positive Power Supply
Functional Features
- High-speed voltage feedback amplifier
- Low distortion and noise
- Wide supply voltage range
- High output current drive capability
Advantages and Disadvantages
Advantages
- High speed and bandwidth
- Low distortion and noise
- Versatile supply voltage range
Disadvantages
- Limited to voltage feedback applications
- Higher power consumption compared to some low-power op-amps
Working Principles
The LM6171BIM/NOPB operates based on the principles of voltage feedback amplification, where the input voltage is amplified to produce a corresponding output voltage with high speed and accuracy.
Detailed Application Field Plans
The LM6171BIM/NOPB finds extensive use in the following application fields: - High-frequency signal processing - Instrumentation and measurement systems - Communication equipment - Audio amplification
Detailed and Complete Alternative Models
Some alternative models to the LM6171BIM/NOPB include: - AD8065 - OPA836 - LT1228 - MAX4239
In conclusion, the LM6171BIM/NOPB is a high-speed voltage feedback amplifier with versatile characteristics, making it suitable for various electronic applications requiring high-speed and accurate signal processing.
Word count: 411
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LM6171BIM/NOPB in technische oplossingen
What is the maximum supply voltage for LM6171BIM/NOPB?
- The maximum supply voltage for LM6171BIM/NOPB is ±15V.
What is the typical input offset voltage of LM6171BIM/NOPB?
- The typical input offset voltage of LM6171BIM/NOPB is 0.5mV.
What is the unity gain bandwidth of LM6171BIM/NOPB?
- The unity gain bandwidth of LM6171BIM/NOPB is 100 MHz.
Can LM6171BIM/NOPB operate with a single supply voltage?
- No, LM6171BIM/NOPB requires a dual supply voltage.
What is the recommended operating temperature range for LM6171BIM/NOPB?
- The recommended operating temperature range for LM6171BIM/NOPB is -40°C to 85°C.
Does LM6171BIM/NOPB have short-circuit protection?
- Yes, LM6171BIM/NOPB has built-in short-circuit protection.
What is the input common-mode voltage range of LM6171BIM/NOPB?
- The input common-mode voltage range of LM6171BIM/NOPB is from V- to V+ - 1.5V.
Is LM6171BIM/NOPB suitable for high-speed data acquisition applications?
- Yes, LM6171BIM/NOPB is suitable for high-speed data acquisition applications.
What is the typical slew rate of LM6171BIM/NOPB?
- The typical slew rate of LM6171BIM/NOPB is 300 V/µs.
Can LM6171BIM/NOPB be used in audio amplifier circuits?
- Yes, LM6171BIM/NOPB can be used in audio amplifier circuits.