LM4040A50IDCKR

Product Overview

Category: Integrated Circuit (IC)
Use: Voltage Reference
Characteristics: Precision, Low Dropout, Low Noise
Package: SC-70 (SOT-323), Tape and Reel
Essence: LM4040A50IDCKR is a precision voltage reference IC that provides a stable and accurate output voltage of 5.0V.
Packaging/Quantity: The LM4040A50IDCKR is available in tape and reel packaging with 3000 units per reel.

Specifications

Output Voltage: 5.0V
Initial Accuracy: ±0.1%
Temperature Coefficient: 100 ppm/°C
Operating Temperature Range: -40°C to +85°C
Quiescent Current: 60 µA
Dropout Voltage: 200 mV
Noise Voltage: 35 µVrms

Pin Configuration

The LM4040A50IDCKR has three pins:

VOUT: Output Voltage Pin
GND: Ground Pin
VIN: Input Voltage Pin

Functional Features

High precision and accuracy: The LM4040A50IDCKR offers an initial accuracy of ±0.1%, ensuring a stable and reliable output voltage.
Low dropout voltage: With a dropout voltage of only 200 mV, the LM4040A50IDCKR can operate efficiently even when the input voltage is close to the desired output voltage.
Low noise: The low noise voltage of 35 µVrms ensures minimal interference and distortion in sensitive applications.
Wide operating temperature range: The LM4040A50IDCKR can operate reliably in a temperature range of -40°C to +85°C, making it suitable for various environments.

Advantages and Disadvantages

Advantages

High precision and accuracy
Low dropout voltage
Low noise
Wide operating temperature range

Disadvantages

Limited output voltage options (only 5.0V)

Working Principles

The LM4040A50IDCKR utilizes a bandgap reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a proportional-to-absolute-temperature (PTAT) current source and a negative temperature coefficient (NTC) resistor. This ensures that the output voltage remains constant over a wide temperature range.

Detailed Application Field Plans

The LM4040A50IDCKR is commonly used in applications that require a precise and stable voltage reference. Some of its typical application fields include:

Analog-to-Digital Converters (ADCs)
Digital-to-Analog Converters (DACs)
Voltage regulators
Precision measurement equipment
Sensor calibration
Battery-powered devices

Detailed and Complete Alternative Models

LM4040A10IDCKR: 10V output voltage
LM4040A20IDCKR: 2.0V output voltage
LM4040A30IDCKR: 3.0V output voltage
LM4040A40IDCKR: 4.0V output voltage

These alternative models provide different output voltage options to suit specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LM4040A50IDCKR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of LM4040A50IDCKR in technical solutions:

Q: What is LM4040A50IDCKR? A: LM4040A50IDCKR is a precision voltage reference IC that provides a stable and accurate output voltage of 5.0V.
Q: What is the typical application of LM4040A50IDCKR? A: LM4040A50IDCKR is commonly used as a voltage reference in various electronic circuits, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and voltage regulators.
Q: What is the voltage accuracy of LM4040A50IDCKR? A: The voltage accuracy of LM4040A50IDCKR is typically ±0.1% at room temperature.
Q: What is the operating temperature range of LM4040A50IDCKR? A: LM4040A50IDCKR can operate within a temperature range of -40°C to +85°C.
Q: Can LM4040A50IDCKR be used in battery-powered applications? A: Yes, LM4040A50IDCKR is suitable for battery-powered applications as it has low quiescent current consumption.
Q: How much current can LM4040A50IDCKR source or sink? A: LM4040A50IDCKR can source or sink up to 15mA of current.
Q: Is LM4040A50IDCKR available in different package options? A: Yes, LM4040A50IDCKR is available in a small SOT-23 package, which is compact and suitable for space-constrained designs.
Q: Can LM4040A50IDCKR be used in automotive applications? A: Yes, LM4040A50IDCKR is qualified for automotive applications and meets the necessary standards.
Q: Does LM4040A50IDCKR require any external components for operation? A: No, LM4040A50IDCKR does not require any external components as it is a standalone voltage reference.
Q: What is the long-term stability of LM4040A50IDCKR? A: LM4040A50IDCKR has excellent long-term stability, typically maintaining its accuracy over time.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.