Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
INA213BIDCKT
Details bekijken DataSheets

INA213BIDCKT

Product Overview

Category

The INA213BIDCKT belongs to the category of integrated circuit (IC) amplifiers.

Use

It is primarily used for precision current sensing in various applications.

Characteristics

  • High accuracy and precision
  • Low offset voltage
  • Wide input voltage range
  • High common-mode rejection ratio (CMRR)
  • Low quiescent current

Package

The INA213BIDCKT is available in a small surface-mount package, known as the DCK package.

Essence

The essence of the INA213BIDCKT lies in its ability to accurately measure current in a wide range of applications.

Packaging/Quantity

The INA213BIDCKT is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 26V
  • Input Common-Mode Voltage Range: -0.2V to +26V
  • Output Voltage Swing: -Vs+1.2V to Vs-1.2V
  • Quiescent Current: 350µA
  • Gain Bandwidth Product: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The INA213BIDCKT has eight pins, which are labeled as follows:

  1. V+
  2. V-
  3. REF
  4. OUT
  5. NC
  6. IN-
  7. IN+
  8. GND

Functional Features

  • High accuracy current sensing
  • Differential input voltage measurement
  • Low power consumption
  • Overload protection
  • Wide temperature range operation

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Wide input voltage range
  • Low offset voltage
  • Excellent common-mode rejection
  • Small package size

Disadvantages

  • Limited gain bandwidth product
  • Higher cost compared to some alternatives

Working Principles

The INA213BIDCKT operates based on the principle of current sensing using a precision amplifier. It measures the voltage drop across a shunt resistor in series with the current path and amplifies it to provide an accurate representation of the current flowing through the circuit.

Detailed Application Field Plans

The INA213BIDCKT finds applications in various fields, including:

  1. Power management systems
  2. Battery monitoring and charging circuits
  3. Motor control systems
  4. Industrial automation
  5. Current measurement in electronic equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the INA213BIDCKT are:

  1. INA210
  2. INA212
  3. INA214
  4. AD8210
  5. MAX4080

These models offer similar functionality and features, but may have different specifications and package options.

In conclusion, the INA213BIDCKT is a high-precision current sensing amplifier that offers excellent accuracy and performance in a wide range of applications. Its small package size and low power consumption make it suitable for various electronic systems requiring precise current measurements.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van INA213BIDCKT in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of INA213BIDCKT in technical solutions:

  1. Q: What is INA213BIDCKT? A: INA213BIDCKT is a high-side current shunt monitor IC that can accurately measure current flowing through a shunt resistor.

  2. Q: How does INA213BIDCKT work? A: INA213BIDCKT works by measuring the voltage drop across a shunt resistor and converting it into a proportional output voltage.

  3. Q: What is the typical supply voltage range for INA213BIDCKT? A: The typical supply voltage range for INA213BIDCKT is between 2.7V and 26V.

  4. Q: Can INA213BIDCKT measure both AC and DC currents? A: Yes, INA213BIDCKT can measure both AC and DC currents.

  5. Q: What is the maximum current that INA213BIDCKT can measure? A: The maximum current that INA213BIDCKT can measure depends on the shunt resistor used. It has a maximum input voltage of ±320mV.

  6. Q: Does INA213BIDCKT require an external amplifier? A: No, INA213BIDCKT has a built-in amplifier, so it does not require an external amplifier.

  7. Q: Can INA213BIDCKT be used in high-precision applications? A: Yes, INA213BIDCKT has a low offset voltage and high accuracy, making it suitable for high-precision applications.

  8. Q: Is INA213BIDCKT suitable for battery monitoring applications? A: Yes, INA213BIDCKT can be used for battery monitoring applications to measure the current flowing in and out of the battery.

  9. Q: Can INA213BIDCKT be used in automotive applications? A: Yes, INA213BIDCKT is suitable for automotive applications such as motor control, battery management, and power distribution systems.

  10. Q: Are there any special considerations when designing with INA213BIDCKT? A: It is important to consider proper PCB layout techniques, such as minimizing trace lengths and keeping sensitive analog signals away from noisy digital signals, to ensure accurate measurements with INA213BIDCKT.

Please note that these answers are general and may vary depending on specific application requirements.