Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
DAC811KU
Details bekijken DataSheets

DAC811KU

Product Overview

  • Category: Digital-to-Analog Converter (DAC)
  • Use: Converts digital signals into analog signals
  • Characteristics:
    • High precision and accuracy
    • Fast conversion speed
    • Low power consumption
  • Package: Integrated circuit (IC)
  • Essence: Converts binary data to analog voltage levels
  • Packaging/Quantity: Available in a standard IC package, quantity varies based on supplier

Specifications

  • Resolution: 12 bits
  • Input Voltage Range: 0V to Vref
  • Output Voltage Range: 0V to Vref
  • Reference Voltage (Vref): Adjustable, typically 2.5V or 5V
  • Conversion Speed: Up to 1 MSPS (Mega Samples Per Second)
  • Power Supply: +5V DC
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The DAC811KU has the following pin configuration:

  1. VDD: Power supply input (+5V)
  2. VREF: Reference voltage input
  3. AGND: Analog ground
  4. AOUT: Analog output voltage
  5. DGND: Digital ground
  6. DB11-DB0: Digital input data bus (12 bits)
  7. CS: Chip select input
  8. WR: Write control input
  9. RD: Read control input
  10. LDAC: Load DAC input
  11. CLR: Clear input
  12. CLK: Clock input

Functional Features

  • High-resolution conversion: The DAC811KU provides 12-bit resolution, allowing for precise analog output.
  • Fast conversion speed: With a maximum conversion speed of 1 MSPS, it can quickly convert digital signals into analog voltages.
  • Low power consumption: The DAC811KU is designed to operate with low power consumption, making it suitable for battery-powered devices.
  • Adjustable reference voltage: The reference voltage (Vref) can be adjusted to suit specific application requirements.
  • Easy integration: The DAC811KU is available in a standard IC package, making it easy to integrate into various electronic systems.

Advantages and Disadvantages

Advantages: - High precision and accuracy - Fast conversion speed - Low power consumption - Adjustable reference voltage

Disadvantages: - Limited resolution compared to higher-end DACs - Requires external components for proper operation

Working Principles

The DAC811KU operates on the principle of binary-weighted resistor networks. It converts digital input data into corresponding analog voltages using a combination of resistors and switches. The digital input data controls the switches, which connect or disconnect the resistors from the output circuitry. By adjusting the connection of these resistors, the DAC generates an analog output voltage proportional to the digital input value.

Detailed Application Field Plans

The DAC811KU finds applications in various fields, including:

  1. Audio Systems: Used to convert digital audio signals into analog signals for amplification and playback.
  2. Instrumentation: Enables precise control of analog outputs in measurement and testing equipment.
  3. Industrial Automation: Converts digital control signals into analog signals for controlling actuators and sensors.
  4. Communication Systems: Used in base stations and transceivers to convert digital signals into analog signals for transmission.
  5. Automotive Electronics: Enables control of analog functions in automotive systems such as audio, climate control, and engine management.

Detailed and Complete Alternative Models

  1. DAC814KU: Similar to DAC811KU but with 14-bit resolution.
  2. DAC822KU: Dual-channel DAC with 12-bit resolution.
  3. DAC8562KU: Higher-resolution DAC with 16-bit resolution and integrated voltage reference.

These alternative models offer different features and specifications to suit specific application requirements.

Word count: 455 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DAC811KU in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of DAC811KU in technical solutions:

  1. Q: What is DAC811KU? A: DAC811KU is a digital-to-analog converter (DAC) integrated circuit that converts digital signals into analog voltage outputs.

  2. Q: What is the resolution of DAC811KU? A: The DAC811KU has a resolution of 12 bits, meaning it can convert digital inputs into 4096 different analog voltage levels.

  3. Q: What is the operating voltage range of DAC811KU? A: The DAC811KU operates within a voltage range of +5V to +15V.

  4. Q: How many channels does DAC811KU have? A: The DAC811KU has a single channel, which means it can convert one digital input into an analog voltage output.

  5. Q: What is the maximum output voltage range of DAC811KU? A: The DAC811KU can provide an output voltage range of 0V to Vref, where Vref is the reference voltage supplied to the IC.

  6. Q: What is the settling time of DAC811KU? A: The settling time of DAC811KU is typically around 10 microseconds, which is the time required for the output voltage to stabilize after a change in the digital input.

  7. Q: Can DAC811KU be used in both single-ended and differential mode? A: Yes, DAC811KU can be used in both single-ended and differential mode, depending on the application requirements.

  8. Q: What is the power consumption of DAC811KU? A: The power consumption of DAC811KU varies depending on the operating conditions, but it typically ranges from 5mW to 10mW.

  9. Q: Does DAC811KU have any built-in reference voltage source? A: No, DAC811KU does not have a built-in reference voltage source. An external reference voltage needs to be provided for accurate conversion.

  10. Q: What are some common applications of DAC811KU? A: DAC811KU is commonly used in various applications such as audio equipment, instrumentation, motor control, and industrial automation where precise analog voltage outputs are required.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.