STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STW27NM60ND
Details bekijken DataSheets

STW27NM60ND

Introduction

The STW27NM60ND is a power MOSFET belonging to the category of semiconductor devices. It is commonly used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Power switching applications
  • Characteristics: High voltage capability, low input capacitance, fast switching speed
  • Package: TO-247
  • Essence: Power MOSFET for efficient power management
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 27A
  • On-state Resistance (RDS(on)): 0.14Ω
  • Gate Threshold Voltage (VGS(th)): 2-4V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The STW27NM60ND features a standard TO-247 pin configuration with three pins: gate (G), drain (D), and source (S).

Functional Features

  • High voltage capability allows for use in various power applications
  • Low input capacitance enables fast switching speeds
  • Efficient power management due to low on-state resistance

Advantages and Disadvantages

Advantages

  • High voltage capability suitable for diverse applications
  • Fast switching speed enhances overall system efficiency
  • Low on-state resistance minimizes power losses

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful handling and ESD protection due to sensitivity

Working Principles

The STW27NM60ND operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. By modulating the gate-source voltage, the MOSFET can efficiently switch high power loads.

Detailed Application Field Plans

The STW27NM60ND finds extensive use in the following application fields: 1. Switched-mode power supplies 2. Motor control systems 3. Solar inverters 4. LED lighting 5. Electric vehicle powertrains

Detailed and Complete Alternative Models

  1. STW26NM60ND: Similar specifications with slight variations in performance
  2. STW28NM60ND: Higher current rating and lower on-state resistance for more demanding applications
  3. STW25NM60ND: Lower current rating and on-state resistance for cost-sensitive designs

In conclusion, the STW27NM60ND power MOSFET offers high voltage capability, fast switching speed, and efficient power management, making it an ideal choice for various power applications.

Word Count: 345

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STW27NM60ND in technische oplossingen

  1. What is the maximum drain-source voltage rating of STW27NM60ND?

    • The maximum drain-source voltage rating of STW27NM60ND is 600V.

  2. What is the continuous drain current rating of STW27NM60ND?

    • The continuous drain current rating of STW27NM60ND is 27A.

  3. What is the on-state resistance (RDS(on)) of STW27NM60ND?

    • The on-state resistance (RDS(on)) of STW27NM60ND is typically 0.08 ohms.

  4. Can STW27NM60ND be used in high-power switching applications?

    • Yes, STW27NM60ND is suitable for high-power switching applications due to its low RDS(on) and high drain-source voltage rating.

  5. What are the typical gate charge characteristics of STW27NM60ND?

    • The typical gate charge characteristics of STW27NM60ND are specified in the datasheet and should be considered when designing the gate drive circuit.

  6. Is STW27NM60ND suitable for motor control applications?

    • Yes, STW27NM60ND can be used in motor control applications due to its high current and voltage ratings.

  7. What are the recommended thermal management considerations for STW27NM60ND?

    • Adequate heat sinking and thermal management should be implemented to ensure proper operation of STW27NM60ND in high-power applications.

  8. Does STW27NM60ND require external protection circuitry?

    • It is recommended to implement appropriate external protection circuitry, such as overcurrent and overvoltage protection, to safeguard STW27NM60ND and the overall system.

  9. What are the typical application circuits for STW27NM60ND?

    • Typical application circuits can be found in the datasheet, including examples for motor drives, power supplies, and inverters.

  10. Are there any specific layout considerations for using STW27NM60ND in a PCB design?

    • Proper PCB layout techniques, such as minimizing loop area and providing adequate isolation, should be followed to optimize the performance of STW27NM60ND in a circuit design.