STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STP34NM60N
Details bekijken DataSheets

STP34NM60N

Introduction

The STP34NM60N is a power MOSFET belonging to the category of semiconductor devices. It is widely used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Power switching applications
  • Characteristics: High voltage capability, low on-resistance, fast switching speed
  • Package: TO-220
  • Essence: Power MOSFET for efficient power management
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 34A
  • On-Resistance: 0.08 ohms
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The STP34NM60N features a standard TO-220 pin configuration with three pins: 1. Gate (G): Input for controlling the switching operation 2. Drain (D): Output terminal for the load 3. Source (S): Common reference terminal

Functional Features

  • High Voltage Capability: Suitable for high-power applications
  • Low On-Resistance: Minimizes power losses and heat generation
  • Fast Switching Speed: Enables efficient power management and control

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Reliable performance in power switching applications

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful thermal management due to high power dissipation

Working Principles

The STP34NM60N operates based on the principles of field-effect transistors, utilizing the control of the gate voltage to modulate the flow of current between the drain and source terminals. When the gate voltage is applied, the MOSFET allows the passage of current, enabling efficient power switching.

Detailed Application Field Plans

The STP34NM60N finds extensive use in various applications, including: - Switched-Mode Power Supplies: Efficiently regulates power flow in electronic devices - Motor Control: Enables precise control of motor speed and direction - Inverters: Facilitates the conversion of DC power to AC power in renewable energy systems - Electronic Ballasts: Used in lighting systems for efficient power management

Detailed and Complete Alternative Models

  1. IRF840: Similar power MOSFET with a voltage rating of 500V
  2. IXFH34N60P3: High-voltage MOSFET with enhanced thermal performance
  3. FDMS86181: Power MOSFET optimized for automotive applications

In conclusion, the STP34NM60N power MOSFET offers high-performance characteristics suitable for a wide range of power switching applications, making it an essential component in modern electronic systems.

[Word Count: 398]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STP34NM60N in technische oplossingen

  1. What is the STP34NM60N?

    • The STP34NM60N is a power MOSFET transistor designed for high efficiency and low power dissipation in various technical solutions.

  2. What are the key specifications of the STP34NM60N?

    • The STP34NM60N features a voltage rating of 600V, a continuous drain current of 34A, and a low on-resistance for efficient power management.

  3. In what applications can the STP34NM60N be used?

    • The STP34NM60N is commonly used in switch mode power supplies, motor control, lighting systems, and other applications requiring high power efficiency.

  4. What is the typical operating temperature range for the STP34NM60N?

    • The STP34NM60N has a wide operating temperature range from -55°C to 150°C, making it suitable for various environmental conditions.

  5. How does the STP34NM60N contribute to energy efficiency in technical solutions?

    • The low on-resistance and high switching speed of the STP34NM60N minimize power losses and improve overall energy efficiency in power management applications.

  6. What are the recommended circuit configurations for using the STP34NM60N in a motor control application?

    • In motor control applications, the STP34NM60N can be configured in H-bridge or half-bridge configurations to efficiently drive and control the speed of motors.

  7. Does the STP34NM60N require any specific heat sinking or thermal management considerations?

    • Depending on the application and power dissipation requirements, proper heat sinking and thermal management may be necessary to ensure optimal performance and reliability.

  8. Are there any common failure modes or reliability concerns associated with the STP34NM60N?

    • The STP34NM60N is designed for robustness and reliability, but proper attention to voltage and current ratings, as well as ESD protection, should be observed to prevent potential failures.

  9. Can the STP34NM60N be used in parallel configurations to handle higher currents?

    • Yes, the STP34NM60N can be paralleled to increase the current-handling capability in high-power applications, provided that proper matching and current sharing techniques are employed.

  10. Where can I find detailed application notes and reference designs for implementing the STP34NM60N in technical solutions?

    • Application notes, reference designs, and technical documentation for the STP34NM60N can be found on the manufacturer's website or through authorized distributors for comprehensive guidance on its application in various technical solutions.