STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STP13NM50N
Details bekijken DataSheets

STP13NM50N

Introduction

The STP13NM50N is a power MOSFET belonging to the category of semiconductor devices. It is widely used in various electronic applications due to its unique characteristics and performance capabilities.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The STP13NM50N is utilized as a switching device in power supply circuits, motor control, and other high-power applications.
  • Characteristics: It exhibits low on-state resistance, high switching speed, and low gate charge, making it suitable for high-efficiency power conversion.
  • Package: The STP13NM50N is typically available in a TO-220 package, providing thermal efficiency and ease of mounting.
  • Essence: Its essence lies in providing efficient power switching and control in various electronic systems.
  • Packaging/Quantity: It is commonly supplied in reels or tubes containing multiple units per package.

Specifications

  • Voltage Rating: 500V
  • Current Rating: 11A
  • On-State Resistance (RDS(on)): 0.35 ohms
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 150°C
  • Package Type: TO-220

Detailed Pin Configuration

The STP13NM50N features a standard pin configuration with three pins: Gate (G), Drain (D), and Source (S).

Functional Features

  • Low On-State Resistance: Enables minimal power dissipation and high efficiency in power switching applications.
  • High Switching Speed: Facilitates rapid switching transitions, reducing switching losses.
  • Low Gate Charge: Allows for efficient and precise control of the MOSFET.

Advantages and Disadvantages

Advantages

  • High efficiency in power conversion
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Sensitive to voltage spikes and transients
  • Requires careful consideration of driving circuitry

Working Principles

The STP13NM50N operates based on the principle of field-effect control, where the voltage applied to the gate terminal modulates the conductivity between the drain and source terminals, allowing for efficient power switching.

Detailed Application Field Plans

The STP13NM50N finds extensive use in the following application fields: 1. Power Supplies: Utilized in switch-mode power supplies for efficient voltage regulation. 2. Motor Control: Employed in motor drive circuits for controlling the speed and direction of motors. 3. Inverters: Integrated into inverter circuits for converting DC power to AC power in renewable energy systems.

Detailed and Complete Alternative Models

Some alternative models to the STP13NM50N include: - IRF840 - FQP30N06L - IRL540

In conclusion, the STP13NM50N power MOSFET offers high-performance characteristics and is widely employed in diverse electronic applications requiring efficient power switching and control.

Word Count: 410

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STP13NM50N in technische oplossingen

  1. What is the STP13NM50N?

    • The STP13NM50N is a power MOSFET designed for high-voltage, high-speed power switching applications.

  2. What are the key specifications of the STP13NM50N?

    • The STP13NM50N has a maximum drain-source voltage of 500V, a continuous drain current of 11A, and a low on-resistance.

  3. What are the typical applications of the STP13NM50N?

    • The STP13NM50N is commonly used in applications such as switch mode power supplies, motor control, and lighting ballasts.

  4. What are the advantages of using the STP13NM50N in technical solutions?

    • The STP13NM50N offers low on-resistance, high switching speed, and high input impedance, making it suitable for efficient power management.

  5. How does the STP13NM50N compare to other similar MOSFETs?

    • The STP13NM50N offers a good balance of performance, cost, and reliability compared to other MOSFETs in its class.

  6. What are the recommended operating conditions for the STP13NM50N?

    • The STP13NM50N should be operated within its specified voltage, current, and temperature limits to ensure reliable performance.

  7. Are there any specific layout or thermal considerations when using the STP13NM50N?

    • Proper PCB layout and thermal management are important for maximizing the performance and reliability of the STP13NM50N in a technical solution.

  8. Can the STP13NM50N be used in automotive applications?

    • Yes, the STP13NM50N is suitable for use in automotive systems such as electronic control units and motor drives.

  9. What protection features does the STP13NM50N offer?

    • The STP13NM50N may include built-in protection against overcurrent, overvoltage, and thermal issues, depending on the specific model.

  10. Where can I find detailed application notes and reference designs for using the STP13NM50N?

    • Detailed application notes and reference designs for the STP13NM50N can be found on the manufacturer's website or in the product datasheet.