STM8S207S8T3C

Product Overview

Category: Microcontroller
Use: Embedded systems, IoT devices, consumer electronics
Characteristics: Low power consumption, high performance, rich peripheral set
Package: TSSOP20
Essence: 8-bit microcontroller with advanced core and peripherals
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

Core: STM8
CPU Frequency: Up to 24 MHz
Flash Memory: 64 KB
RAM: 2 KB
Operating Voltage: 2.95V to 5.5V
I/O Pins: 16
Timers: 4
UART: 1
SPI: 1
I2C: 1
ADC: 10-bit, 10 channels
Temperature Range: -40°C to +85°C

Pin Configuration

The STM8S207S8T3C microcontroller has a total of 20 pins, which are assigned for various functions as follows:

PD0 - GPIO or USART2_RX
PD1 - GPIO or USART2_TX
PD2 - GPIO or USART2_CK
PD3 - GPIO or USART2_CTS
PD4 - GPIO or USART2_RTS
VSS - Ground
VDD - Power Supply
NRST - Reset
PA1 - GPIO or TIM2_CH2
PA2 - GPIO or TIM2_CH3
PA3 - GPIO or TIM2_CH4
PA4 - GPIO or TIM1_CH1
PA5 - GPIO or TIM1_CH2
PA6 - GPIO or TIM1_CH3
PA7 - GPIO or TIM1_CH4
VSS - Ground
VDD - Power Supply
PC3 - GPIO or ADC_IN3
PC4 - GPIO or ADC_IN4
PC5 - GPIO or ADC_IN5

Functional Features

Advanced STM8 core with Harvard architecture
High-performance peripherals for enhanced functionality
Low power consumption for energy-efficient designs
Flexible I/O pins for versatile applications
Robust communication interfaces (UART, SPI, I2C)
Precise analog-to-digital conversion with the built-in ADC
Timers for accurate timing and PWM generation

Advantages and Disadvantages

Advantages: - Cost-effective solution for 8-bit microcontroller applications - Rich peripheral set allows for diverse functionality - Low power consumption extends battery life in portable devices - Wide operating voltage range enables compatibility with various power sources

Disadvantages: - Limited processing power compared to 32-bit microcontrollers - Smaller memory capacity may restrict complex application development - Less suitable for computationally intensive tasks

Working Principles

The STM8S207S8T3C operates on the STM8 core, which is based on a high-performance 8-bit CPU. It executes instructions fetched from the Flash memory and interacts with various peripherals to perform desired tasks. The microcontroller can be programmed using the STM8 standard peripheral library or other compatible development tools.

Application Field Plans

The STM8S207S8T3C microcontroller finds applications in various fields, including: - Industrial automation - Home automation - Automotive electronics - Consumer electronics - Internet of Things (IoT) devices - Medical devices

Alternative Models

STM8S105K6T6C
STM8S103F3P6
STM8L152R8T6
STM8L151K6T6C
STM8L101F3P6

These alternative models offer similar functionality and can be considered as replacements for the STM8S207S8T3C in specific applications.

Word count: 440 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STM8S207S8T3C in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of STM8S207S8T3C in technical solutions:

Q: What is the STM8S207S8T3C microcontroller used for?
A: The STM8S207S8T3C microcontroller is commonly used in various technical solutions, such as industrial automation, consumer electronics, and automotive applications.
Q: What is the maximum clock frequency supported by the STM8S207S8T3C?
A: The STM8S207S8T3C microcontroller supports a maximum clock frequency of 16 MHz.
Q: How many I/O pins does the STM8S207S8T3C have?
A: The STM8S207S8T3C has a total of 64 I/O pins, which can be used for various purposes like digital input/output, PWM, and UART communication.
Q: Does the STM8S207S8T3C support analog-to-digital conversion (ADC)?
A: Yes, the STM8S207S8T3C has an integrated 10-bit ADC module, allowing it to convert analog signals into digital values.
Q: Can I program the STM8S207S8T3C using C language?
A: Yes, the STM8S207S8T3C can be programmed using the C programming language, along with other supported programming languages like assembly.
Q: What is the flash memory size of the STM8S207S8T3C?
A: The STM8S207S8T3C microcontroller has a flash memory size of 64 KB, which can be used to store program code and data.
Q: Does the STM8S207S8T3C have any built-in communication interfaces?
A: Yes, the STM8S207S8T3C supports various communication interfaces like UART, SPI, and I2C, allowing it to communicate with other devices or modules.
Q: Can the STM8S207S8T3C operate in low-power modes?
A: Yes, the STM8S207S8T3C has several low-power modes, such as Halt, Active-halt, and Wait, which can help conserve power in battery-powered applications.
Q: Is the STM8S207S8T3C suitable for real-time applications?
A: Yes, the STM8S207S8T3C is capable of handling real-time tasks due to its fast execution speed and interrupt handling capabilities.
Q: Are there any development tools available for programming and debugging the STM8S207S8T3C?
A: Yes, STMicroelectronics provides a range of development tools, including integrated development environments (IDEs) and debuggers, specifically designed for programming and debugging STM8 microcontrollers like the STM8S207S8T3C.