STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STM32L433RCT3
Details bekijken DataSheets

STM32L433RCT3

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices, low-power applications
  • Characteristics: Low power consumption, high performance, rich peripheral set
  • Package: LQFP64
  • Essence: ARM Cortex-M4 32-bit RISC core
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Core: ARM Cortex-M4
  • Clock Speed: Up to 80 MHz
  • Flash Memory: 256 KB
  • RAM: 64 KB
  • Operating Voltage: 1.71V to 3.6V
  • I/O Pins: 51
  • Communication Interfaces: UART, SPI, I2C, USB, CAN
  • Analog Inputs: 12-bit ADC with up to 16 channels
  • Timers: 16-bit and 32-bit timers
  • Power Consumption: Ultra-low power mode with down to 0.28 µA standby current

Pin Configuration

The STM32L433RCT3 microcontroller features a total of 64 pins in the LQFP package. The pin configuration is as follows:

  • Pin 1: VDD
  • Pin 2: GND
  • Pin 3: PA0
  • Pin 4: PA1
  • ...
  • Pin 63: PC14
  • Pin 64: PC15

Functional Features

  • High-performance ARM Cortex-M4 core for efficient processing
  • Rich set of communication interfaces for seamless connectivity
  • Low power consumption for extended battery life
  • Advanced analog-to-digital converter for precise measurements
  • Flexible timers for accurate timing control
  • Comprehensive development ecosystem with software libraries and tools

Advantages and Disadvantages

Advantages: - Low power consumption makes it ideal for battery-powered applications - High-performance core enables efficient processing of complex tasks - Rich peripheral set allows for versatile connectivity options - Extensive development ecosystem simplifies software development

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers - LQFP package may not be suitable for space-constrained designs

Working Principles

The STM32L433RCT3 operates based on the ARM Cortex-M4 architecture. It executes instructions fetched from flash memory and interacts with peripherals through various communication interfaces. The microcontroller can be programmed using development tools and software libraries provided by STMicroelectronics.

Detailed Application Field Plans

The STM32L433RCT3 is well-suited for a wide range of applications, including but not limited to: - Internet of Things (IoT) devices - Wearable technology - Home automation systems - Industrial control systems - Sensor networks - Medical devices

Alternative Models

For those seeking alternatives to the STM32L433RCT3, the following microcontrollers can be considered: - STM32L476RCT6 - STM32F407VGT6 - STM32F103C8T6 - ATmega328P

These alternative models offer different features and specifications, allowing developers to choose the most suitable microcontroller for their specific application requirements.

Word count: 346 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STM32L433RCT3 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of STM32L433RCT3 in technical solutions:

  1. Q: What is the STM32L433RCT3 microcontroller? A: The STM32L433RCT3 is a low-power microcontroller based on the ARM Cortex-M4 core, designed for energy-efficient applications.

  2. Q: What are the key features of the STM32L433RCT3? A: Some key features include ultra-low power consumption, a wide range of peripherals, high-performance processing, and a rich set of development tools.

  3. Q: What is the maximum clock frequency of the STM32L433RCT3? A: The maximum clock frequency is 80 MHz, allowing for fast and efficient execution of instructions.

  4. Q: Can the STM32L433RCT3 operate on battery power? A: Yes, the microcontroller is specifically designed for low-power applications and can operate on battery power for extended periods.

  5. Q: What communication interfaces are supported by the STM32L433RCT3? A: It supports various interfaces such as UART, SPI, I2C, USB, CAN, and more, enabling seamless integration with other devices.

  6. Q: Is the STM32L433RCT3 suitable for IoT applications? A: Absolutely! Its low-power capabilities, extensive peripheral support, and connectivity options make it ideal for IoT solutions.

  7. Q: Can I develop software for the STM32L433RCT3 using popular IDEs? A: Yes, the microcontroller is compatible with popular IDEs like Keil MDK, IAR Embedded Workbench, and STM32CubeIDE.

  8. Q: How much flash memory does the STM32L433RCT3 have? A: It has 256 KB of flash memory, providing ample space for storing program code and data.

  9. Q: What is the operating voltage range of the STM32L433RCT3? A: The microcontroller operates within a voltage range of 1.71V to 3.6V, making it suitable for various power supply configurations.

  10. Q: Are there any development boards available for the STM32L433RCT3? A: Yes, STMicroelectronics offers development boards like Nucleo-64 and Discovery kits specifically designed for the STM32L433RCT3.

Please note that these answers are general and may vary depending on specific use cases and requirements.