STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STM32L052K8U6DTR
Details bekijken DataSheets

STM32L052K8U6DTR

Product Overview

Category

The STM32L052K8U6DTR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • Low power consumption
  • High performance
  • Integrated peripherals
  • Small form factor
  • Wide operating voltage range

Package

The STM32L052K8U6DTR comes in a small package, typically in a surface-mount technology (SMT) package.

Essence

This microcontroller is designed to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The STM32L052K8U6DTR is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel.

Specifications

  • Microcontroller core: ARM Cortex-M0+
  • Clock speed: Up to 32 MHz
  • Flash memory: 64 KB
  • RAM: 8 KB
  • Operating voltage: 1.65V to 3.6V
  • Digital I/O pins: 32
  • Analog input channels: 10
  • Communication interfaces: UART, SPI, I2C
  • Timers: 16-bit and 32-bit timers
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The STM32L052K8U6DTR has a total of 32 pins, which are assigned for various functions such as GPIO, communication interfaces, and power supply. The pin configuration is as follows:

(Pin Number) - (Pin Name) - (Function)

1 - VDDA - Analog power supply 2 - VSSA - Analog ground 3 - PA0 - General-purpose I/O 4 - PA1 - General-purpose I/O 5 - PA2 - General-purpose I/O 6 - PA3 - General-purpose I/O 7 - PA4 - General-purpose I/O 8 - PA5 - General-purpose I/O 9 - PA6 - General-purpose I/O 10 - PA7 - General-purpose I/O 11 - VDD - Digital power supply 12 - VSS - Ground 13 - PA9 - UART1 TX 14 - PA10 - UART1 RX 15 - PA13 - SWDIO (debug interface) 16 - PA14 - SWCLK (debug interface) 17 - NRST - Reset pin 18 - PC13 - General-purpose I/O 19 - PB0 - General-purpose I/O 20 - PB1 - General-purpose I/O 21 - PB2 - General-purpose I/O 22 - PB10 - General-purpose I/O 23 - PB11 - General-purpose I/O 24 - PB12 - General-purpose I/O 25 - PB13 - General-purpose I/O 26 - PB14 - General-purpose I/O 27 - PB15 - General-purpose I/O 28 - VBAT - Backup battery input 29 - PC14 - General-purpose I/O 30 - PC15 - General-purpose I/O 31 - VDD - Digital power supply 32 - VSS - Ground

Functional Features

  • Low-power modes for energy-efficient operation
  • Advanced peripherals for enhanced functionality
  • Real-time clock (RTC) for timekeeping applications
  • DMA controller for efficient data transfer
  • Multiple communication interfaces for connectivity options
  • Analog-to-digital converter (ADC) for precise analog measurements
  • Flexible GPIOs for versatile digital I/O operations

Advantages and Disadvantages

Advantages

  • Low power consumption enables longer battery life in portable devices.
  • High-performance ARM Cortex-M0+ core ensures efficient processing capabilities.
  • Integrated peripherals reduce the need for external components, saving cost and board space.
  • Small form factor allows for compact designs in space-constrained applications.
  • Wide operating voltage range provides flexibility in various power supply scenarios.

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications that can be implemented.
  • The small package size may require additional effort for soldering and handling during assembly.

Working Principles

The STM32L052K8U6DTR operates based on the ARM Cortex-M0+ core architecture. It executes instructions stored in its flash memory, interacts with peripherals through various communication interfaces, and performs data processing tasks. The microcontroller can operate in different power modes to optimize energy consumption based on the application requirements.

Detailed Application Field Plans

The STM32L052K8U6DTR is suitable for a wide range of applications, including but not limited to: - Internet of Things (IoT) devices - Wearable electronics - Home automation systems - Industrial control systems - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

  • STM32L051K8U6DTR
  • STM32L053C8

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STM32L052K8U6DTR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of STM32L052K8U6DTR in technical solutions:

  1. Q: What is the STM32L052K8U6DTR microcontroller used for? A: The STM32L052K8U6DTR is a low-power microcontroller commonly used in battery-powered applications, IoT devices, and other energy-efficient solutions.

  2. Q: What is the maximum clock frequency supported by the STM32L052K8U6DTR? A: The STM32L052K8U6DTR supports a maximum clock frequency of 32 MHz.

  3. Q: How much flash memory does the STM32L052K8U6DTR have? A: The STM32L052K8U6DTR has 64 KB of flash memory for program storage.

  4. Q: Can I use the STM32L052K8U6DTR for analog signal processing? A: Yes, the STM32L052K8U6DTR has a built-in 12-bit ADC (Analog-to-Digital Converter) that can be used for analog signal processing.

  5. Q: Does the STM32L052K8U6DTR support communication protocols like UART, SPI, and I2C? A: Yes, the STM32L052K8U6DTR supports UART, SPI, and I2C communication interfaces, making it suitable for various connectivity requirements.

  6. Q: What is the operating voltage range of the STM32L052K8U6DTR? A: The STM32L052K8U6DTR operates within a voltage range of 1.65V to 3.6V.

  7. Q: Can I use the STM32L052K8U6DTR in low-power applications? A: Absolutely! The STM32L052K8U6DTR is specifically designed for low-power applications, offering multiple power-saving modes and features.

  8. Q: Does the STM32L052K8U6DTR have any built-in security features? A: Yes, the STM32L052K8U6DTR provides hardware cryptographic accelerators, a True Random Number Generator (TRNG), and read-out protection to enhance system security.

  9. Q: Can I program the STM32L052K8U6DTR using C/C++ language? A: Yes, the STM32L052K8U6DTR can be programmed using various programming languages, including C and C++, with the help of an Integrated Development Environment (IDE) like STM32CubeIDE or Keil.

  10. Q: Are there any development boards available for the STM32L052K8U6DTR? A: Yes, STMicroelectronics offers development boards like Nucleo-64 and Discovery kits that are compatible with the STM32L052K8U6DTR microcontroller, making it easier to prototype and develop applications.

Please note that these answers are general and may vary depending on specific application requirements and the version of the microcontroller being used.