STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STM32F446VCT6
Details bekijken DataSheets

STM32F446VCT6

Product Overview

Category

The STM32F446VCT6 belongs to the category of microcontrollers.

Use

It is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance ARM Cortex-M4 core
  • Clock frequency up to 180 MHz
  • Flash memory capacity of 512 KB
  • RAM capacity of 128 KB
  • Wide range of peripherals and interfaces
  • Low power consumption
  • Rich set of development tools and software libraries

Package

The STM32F446VCT6 is available in a compact LQFP package, which stands for Low-profile Quad Flat Package. This package provides ease of integration into different electronic systems.

Essence

The essence of the STM32F446VCT6 lies in its powerful processing capabilities, extensive peripheral support, and low power consumption, making it suitable for a wide range of applications.

Packaging/Quantity

The STM32F446VCT6 is typically sold in reels or trays, with each reel or tray containing a specific quantity of microcontrollers. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Microcontroller: STM32F446VCT6
  • Core: ARM Cortex-M4
  • Clock Frequency: Up to 180 MHz
  • Flash Memory: 512 KB
  • RAM: 128 KB
  • Operating Voltage: 2.0V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 100
  • Communication Interfaces: UART, SPI, I2C, USB, CAN, Ethernet
  • Analog-to-Digital Converter (ADC): 12-bit, up to 16 channels
  • Digital-to-Analog Converter (DAC): 12-bit, up to 2 channels
  • Timers: General-purpose timers, advanced-control timers
  • DMA Channels: Up to 16 channels

Detailed Pin Configuration

The STM32F446VCT6 microcontroller has a total of 100 pins. The pin configuration is as follows:

  • Pins 1-10: Power supply and ground pins
  • Pins 11-20: GPIO pins
  • Pins 21-30: Communication interface pins (UART, SPI, I2C)
  • Pins 31-40: Analog input pins (ADC)
  • Pins 41-50: Digital output pins
  • Pins 51-60: Timer control pins
  • Pins 61-70: External interrupt pins
  • Pins 71-80: Clock and reset pins
  • Pins 81-90: Debug and programming pins
  • Pins 91-100: Reserved for future use

Functional Features

The STM32F446VCT6 offers the following functional features:

  • High-performance processing capabilities with the ARM Cortex-M4 core
  • Extensive peripheral support for various communication interfaces, analog-to-digital conversion, digital-to-analog conversion, timers, and more
  • Low power consumption, making it suitable for battery-powered applications
  • Rich set of development tools and software libraries provided by the manufacturer
  • Flexible and scalable architecture, allowing for easy integration into different electronic systems

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Wide range of peripherals and interfaces
  • Low power consumption
  • Extensive development tools and software support
  • Scalable architecture for easy integration

Disadvantages

  • Limited availability of alternative models with similar specifications
  • Relatively higher cost compared to some other microcontrollers in the market

Working Principles

The STM32F446VCT6 operates based on the principles of the ARM Cortex-M4 core. It executes instructions stored in its flash memory and interacts with various peripherals and interfaces to perform desired tasks. The microcontroller can be programmed using development tools and software libraries provided by the manufacturer.

Detailed Application Field Plans

The STM32F446VCT6 finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor drives, and robotics.
  2. Consumer electronics: Smart home devices, wearable technology, and audio/video equipment.
  3. Automotive: Infotainment systems, engine control units, and advanced driver-assistance systems (ADAS).
  4. Internet of Things (IoT): Connected devices, sensor networks, and data acquisition systems.
  5. Medical devices: Patient monitoring systems, diagnostic equipment, and implantable devices.

Detailed and Complete Alternative Models

While the STM32F446VCT6 offers a unique combination of features and performance, there are alternative microcontrollers available in the market that can be considered based on specific requirements. Some notable alternatives include:

  1. STM32F407VGT6: Similar architecture with a lower clock frequency and reduced peripheral set.
  2. Atmel SAM4S16C: ARM Cortex-M4-based microcontroller with

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STM32F446VCT6 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of STM32F446VCT6 in technical solutions:

  1. Q: What is the STM32F446VCT6 microcontroller? A: The STM32F446VCT6 is a high-performance microcontroller based on the ARM Cortex-M4 core, commonly used in embedded systems.

  2. Q: What are the key features of the STM32F446VCT6? A: Some key features include a 180 MHz CPU, 512 KB Flash memory, 128 KB RAM, multiple communication interfaces (UART, SPI, I2C), and various peripherals.

  3. Q: Can I use the STM32F446VCT6 for IoT applications? A: Yes, the STM32F446VCT6 is suitable for IoT applications due to its low power consumption, extensive peripheral support, and connectivity options.

  4. Q: How can I program the STM32F446VCT6 microcontroller? A: You can program the STM32F446VCT6 using various development tools such as STM32CubeIDE, Keil MDK, or IAR Embedded Workbench.

  5. Q: Is it possible to interface sensors with the STM32F446VCT6? A: Yes, the STM32F446VCT6 has multiple GPIO pins and communication interfaces that allow you to interface various sensors like temperature, humidity, or motion sensors.

  6. Q: Can I connect external memory to the STM32F446VCT6? A: Yes, the STM32F446VCT6 supports external memory interfaces like SDRAM, NOR Flash, or NAND Flash, allowing you to expand the available memory.

  7. Q: Does the STM32F446VCT6 have built-in security features? A: Yes, the STM32F446VCT6 provides hardware security features like a CRC unit, memory protection unit (MPU), and a unique device ID for secure applications.

  8. Q: Can I use the STM32F446VCT6 for motor control applications? A: Absolutely! The STM32F446VCT6 has advanced timers, PWM outputs, and motor control peripherals that make it suitable for motor control applications.

  9. Q: Is there any support available for software development with the STM32F446VCT6? A: Yes, STMicroelectronics provides a comprehensive software development ecosystem, including libraries, middleware, and example codes to facilitate application development.

  10. Q: Where can I find documentation and resources for the STM32F446VCT6? A: You can find documentation, datasheets, application notes, and other resources on the official STMicroelectronics website or their community forums.

Please note that these answers are general and may vary depending on specific requirements and use cases.